Yamaha BD-S1900 Owners Manual - Page 34

Settings Audio Video Settings Speaker Settings Quick Start Auto Power Off HDMI Control Playback Setting Communication Setup Version USB Memory Management Software Update System Reset 3. Select the next item Press / to select the desired item, then press ENTER. Yes No Press RETURN to return to the previous "Menu" page. 4. Exit the Menu screen Press SETUP or EXIT to exit. Example of the Setup Menu operation Example: Setting "Parental Control" under "Playback Setting" 1 Press SETUP to display the Setup Menu screen. 2 Press / / / to select "Settings", then press ENTER. 3 Press / to select "Playback Setting", then press ENTER. 4 Press / to select "Parental Control", then press ENTER. - When you operate this Player for the first time, the password setting screen will be displayed. See "When setting the password for the first time" below. 5 Enter your 4-digit password. - You cannot move to the next setting screen until you can input the correct password. When setting the password for the first time. 1. To set the password for the first time, press / to select "Yes" to enter the password setting menu, then press ENTER. 2. Enter a 4-digit number for the password, then the same 4-digit number for confirmation. 3. Press ENTER to complete the password setting procedure and move to the next setting screen. Hints - You can clear the 4-digit number by pressing CLEAR. - You can use ENTER on the lower right of the Number buttons instead of ENTER in the Cursor buttons. 6 Press / to select the parental control level for DVD VIDEO, BD-ROM, and then select the country code. Press ENTER after making each selection. Parental Control Disc Language Angle Mark Display Password Setting BD Internet Access Level 3 0 USA 7 Press SETUP or EXIT to exit. ■ Audio Video Settings Hint - The default settings are marked with "*". TV Aspect Ratio You can set the screen aspect ratio of the connected TV, and adjust the video output. If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected TV changes, you will have to change the "TV Aspect Ratio" setting. Wide 16:9*: Select this when connecting to a TV with a 16:9 screen aspect ratio. Normal 4:3: Select this when connecting to a TV with a 4:3 screen aspect ratio. When selecting Normal 4:3 Letter Box*: If you playback a DVD with 16:9 video, the video will be played back with black bands at the top and bottom while maintaining the 16:9 ratio. Pan Scan: If you playback a DVD with 16:9 video, the video will be played back with the left and right sides of the image cut off to display in 4:3 screen aspect ratio. (This function works if the disc is labelled for 4:3PS.) Component Video Out This sets the resolution of the component video output. Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this case, press VIDEO-RESET on the remote control for five seconds. "Component Video Out" will be reset to "480i" (factory preset value). 1080i, 720p, 480p, 480i* Note - Some discs prohibit high definition video output from the COMPONENT jacks. In this case, the video resolution is converted to 480p or 480i. 30 En