Yamaha BD-S667 Owners Manual - Page 19

OTHER CONNECTIONS ■ Connecting to the REMOTE CONTROL jacks - You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks. - Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks. - If your AV receiver is a Yamaha product and has the capability to transmit SCENE control signals, you can use the SCENE function. - You can connect a Yamaha component (such as CD 2 player) corresponds with the SCENE function to the REMOTE CONTROL (OUT) jack of this Player. ■ Connecting the power cable - After all connections are completed, plug the supplied power cable into the AC inlet on the rear of the Player. Then plug into AC outlet. CONNECTION Caution! Do not connect the power cable of this Player until all connections are completed. This Player NETWORK USB BD STORAGE To REMOTE CONTROL (OUT) jack OUT IN REMOTE CONTROL To REMOTE CONTROL (IN) jack To AC inlet To AC outlet Note - TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE UN-INSULATED PARTS OF ANY CABLES WHILE THE POWER CABLE IS CONNECTED. Monaural 3.5 mm mini plug cable (commercially available) Monaural 3.5 mm mini plug cable (commercially available) To remote control in jack To remote control out jack REMOTE CONTROL IN REMOTE CONTROL OUT English Yamaha component Infrared signal receiver or Yamaha component (such as AV receiver) Hints - For details about the SCENE function, refer to the owner's manual supplied with your Yamaha AV receiver. 15 En