Yamaha BD-S671 Owners Manual - Page 39

Network Internet Connection Set this item to Enable when you use BD-Live (p. 29), DLNA (p. 21) and software upgrade from the network (p. 40). Enable*, Disable Information You can display network information screen. On this screen, you can view the information of Interface (Ethernet), Address Type, IP Address, Subnet Mask, Default Gateway, and DNS. Connection Test You can perform an internet connection test. If the test is failed, please check "IP Setting" (p. 35) and perform the test again. IP Setting You can configure the network settings. Auto* Manual Select to automatically configure the network settings of this Player with the DHCP server. Select to configure the network settings (IP Address, Subnet Mask, Default Gateway, and DNS) manually. Hints - Numeric keys Enters characters. - 2/3 Moves the highlight. - CLEAR Deletes a character. - ENTER Saves the settings and exits from the menu. BD-Live Connection You can set access restriction to BD-Live contents. Permitted Partial Permitted* Prohibited Allows all BD-Live discs to connect the network. Allows only discs with owner certification. Prohibits all BD-Live discs to connect the network. DLNA You can set the DLNA (p. 21) to Enable/Disable. When you do not use the DLNA function, set to Disable. Enable*, Disable Proxy Setting You can set Proxy Setting. Set to Disable for normal use. Set to Enable to set the proxy setting. Enable Enables proxy host and proxy port setting. Disable* Sets proxy server to disable. Select this item when proxy server is not used. Proxy Host Sets proxy host. Proxy Port Sets proxy port. SETUP MENU ■ Display Setting The default settings are marked with " * ". TV 3D Output You can select 3D or 2D video output from this Player. Auto* This Player automatically selects 3D or 2D videos. Off This Player always selects 2D videos. Note 4 - Even if you set "3D Output" to "Auto" and play back a Blu-ray 3D disc, this Player selects 2D images depending on the connection and the setting of TV, etc (p. 12). SETTINGS TV Screen You can set the screen aspect ratio of the connected TV, and adjust the video output. If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected TV changes, you will have to change the TV Screen setting. 16:9 Full Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below. 16:9 Normal* Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below. 4:3 Pan Scan Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below. 4:3 Letterbox Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below. Original image size On 16:9 (wide screen) TV 16:9 Full 16:9 Normal 4:3 Original image size On 4:3 TV 4:3 Pan Scan 4:3 Letterbox 16:9 English 35 En