Yamaha CD-S3000 Owners Manual - Page 20

Connections ■ Connecting to the BALANCED OUT jacks Connect your amplifier with the XLR balanced input jacks. The pin assignments for these jacks are shown below. Refer to the owner's manual supplied with your amplifier and verify that its XLR balanced input jacks are compatible with the pin assignments. 1: ground 2: hot ■ Connecting the power cable Plug the power cable into the AC IN inlet when all connections are complete, and then plug in the power cable to the AC outlet. USB TE OUT OPTICAL COAXIAL DIGITAL IN OPTICAL DIGIT AC IN 3: cold When connecting, be sure to match the pins and insert the connector of the "female" XLR balanced cable. When disconnecting, pull out the "female" XLR balanced cable while pressing down the latch lock on the plug. Rear panel of CD-S3000 Latch lock "Female" XLR connector "Male" XLR connector Supplied power cable to an AC outlet 20 En