Yamaha CDS1000 Owner's Manual - Page 10

Controls and functions ■ Remote control 1 SA-CD/CD PURE DIRECT OPEN/CLOSE 2 CD DIMMER 3 8 9 DISPLAY 0 1 2 3 4 4 5 6 7 8 9 0 ENTER CLEAR A B REPEAT PROGRAM RANDOM 5 C D 6 E F 7 G 1 Infrared signal transmitter Sends infrared signals to this unit. 2 SA-CD/CD Switches the playback layer of a hybrid SA-CD between SA-CD and CD (see page 19). y • The SA-CD/CD indicator on the front panel lights up when the SA-CD layer is selected. • This setting is retained even if you turn off this unit. Notes • Audio signals are only output from the ANALOG OUT jacks while the Super Audio CD layer is playing. • Audio signals recorded in DSD multi-channel format cannot be played on this unit. 3 DIMMER Selects brightness level for the front panel display. Each time you press DIMMER, the brightness level changes in the following order. → Brightest → Bright (default) Darkest ← Dark ← y This setting is retained even if you turn off this unit. 4 Numeric buttons Use to select a track directly. Note This operation is ineffective for MP3 or WMA discs. 5 REPEAT Repeats playback of a single track or all tracks. Each time you press REPEAT during playback, the repeat playback mode changes as follows: • REP S (single repeat playback): On reaching the end of the current track, playback repeats from the beginning of the current track. • REP ALL (all repeat playback): On reaching the end of the last track, playback repeats from the beginning of the first track. Note This operation is ineffective for MP3 or WMA discs. 10 En