Yamaha CDX-993 Owner's Manual - Page 19

English CD SYNCHRONIZED RECORDING This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and more precisely. This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed near each other so that both can receive the signals from this unit's remote control transmitter. 3 4 SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH - OUTPUT LEVEL + SKIP STOP PAUSE PLAY 1 4 5 1 Load the disc. 4 If necessary, select a desired track. OPEN/ POWER CLOSE AUTO DISPLAY OFF 5 SKIP or 2 Load a tape on the tape deck. * The peak level search function of this unit is useful for adjusting the recording level on the tape deck. (Refer to page 18.) 3 SYNCHRO This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. 5 PLAY Both CD play and tape deck recording begin. * CD play begins a little later than recording starts. 6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3 - 5 again. To cancel this function Press the STOP button. Notes • To finish or stop the recording, press the stop button on your tape deck. • A programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 13 - 14 for the programming procedure.) • This function can also be used together with the automatic tape-programming function. (Refer to page 15 - 17.) 19