Yamaha CLP-110 Owner's Manual - Page 30

ENGLISH 220 3. Set the voltage selector and connect the power cord. 240 110 127 A voltage selector is provided in some areas. Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a "minus" screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC INLET and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. WARNING An improper voltage setting can cause serious damage to the Clavinova or result in improper operation. • Connecting the damper pedal To use the pedal functions, connect the included damper pedal to the Clavinova. Connect the pedal cord to the [DAMPER PEDAL] jack on the bottom of the Clavinova. Attach two cord holders on the Clavinova as shown in the illustration, then clip the cord into the holders. DAMPER PEDAL THRU OUT MIDI IN After completing the assembly, please check the following. • Are there any parts left over? ➝ Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? ➝ Move the Clavinova to an appropriate location. • Does the Clavinova make a rattling noise when you shake it? ➝ Tighten all screws. • Are the pedal and power cords inserted securely into the sockets? ➝ Check the connection. • If the main unit creaks or is otherwise unsteady when you play the keyboard, refer to the assembly diagrams and re-tighten all screws. When moving the instrument after assembly, always hold the bottom of the main unit. Top portion Key cover CAUTION • Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. 30 CLP-110 Keyboard Stand Assembly