Yamaha CLP-156 Owner's Manual - Page 32

MIDI Functions Other MIDI Functions The MIDI functions listed to the right are engaged by holding down the [MIDI/TRANSPOSE] button and pressing the corresponding voice selector. Full details are given in the following pages. MIDI FUNCTION CHART Function Local Control ON/OFF Program Change ON/OFF Control Change ON/OFF Multi-Timbre Mode MIDI Split & Left Local OFF MIDI Split & Right Local OFF Panel Data Transmit CLP-156 Voice Selector [PIANO 1] [PIANO 2] [CLAVINOVA TONE] [E.PIANO ] [HARPSICHORD] [VIBES] [STRINGS] q Local Control ON/OFF MIDI OUT MIDI IN Sequence Tone Generator Recorder Played from Clavinova keyboard. MIDI IN MIDI OUT Clavinova Local control OFF. Played from MIDI Sequencer. MIDI/ TRANSPOSE CLAVINO PIANO 1 PIANO 2 TONE PIANO 1 = Local Control OFF PIANO 1 = Local Control ON "Local Control" refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control ON" since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. This means that while an external MIDI sequence recorder, for example, plays the Clavinova's internal voices, an external tone generator can be played from the Clavinova keyboard. Z Hold down the [MIDI/TRANSPOSE] button. X Press the [PIANO 1] voice selector. If the PIANO 1 LED is lit when the [PIANO 1] voice selector is pressed, you have turned local control OFF. If the PIANO 1 LED is not lit when the [PIANO 1] voice selector is pressed, you have turned local control ON. C Release the [MIDI/TRANSPOSE] button. q Program Change ON/OFF Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the Clavinova without affecting the external MIDI device, and vice versa. MIDI/ TRANSPOSE CLAVINO PIANO 1 PIANO 2 TONE PIANO 2 = Program Change OFF PIANO 2 = Program Change ON Z Hold down the [MIDI/TRANSPOSE] button. X Press the [PIANO 2] voice selector. If the PIANO 2 LED is lit when the [PIANO 2] voice selector is pressed, you have turned program change reception/transmission OFF. If the PIANO 2 LED is not lit when the [PIANO 2] voice selector is pressed, you have turned program change reception/transmission ON. C Release the [MIDI/TRANSPOSE] button. 32