Yamaha CLP-175 Owner's Manual - Page 98
Message List
View all Yamaha CLP-175 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Message List Detailed Settings The messages are listed in alphabetical order. Message Meaning This will be displayed following the "BulkDataReceiving Voice" message. This indicates that the Clavinova finished receiving the bulk data. Once you have verified this message, you may proceed to the next step. Receiving bulk data has failed. Check the parameter settings and try again. 98 CLP-175 The Clavinova is receiving the voice setting bulk data while this message is displayed. Wait until the message disappears, then proceed to the next step. This message will appear if a sound is audible in the vicinity of the Clavinova during automatic adjustment. The automatic adjustment may abort, and the settings reset to their default values. In this case, perform the automatic adjustment once again. This message means that when the "Speaker" setting is set to Normal and headphones are connected, no sound is output from the speaker on the bottom face, and therefore automatic adjustment of iAFC is not possible. In this case, unplug the headphones. This message means that automatic adjustment of iAFC is not possible because the lid is closed or open with the shorter stay. In this case, open the lid with the longer stay using the inner recess. This message means that automatic adjustment of iAFC is not possible because no sound is output from the speaker on the bottom face. In this case if the "Speaker" setting is Off, turn "Speaker" On. If "Speaker" is set to Normal and headphones are connected, unplug the headphones. This message confirms that in the "VoiceBulkDump" operation (page 92), you pressed the B [-(NO)] button to cancel while data was being transmitted. This message is displayed following the message "Executing." The Clavinova's internal processing is complete. You may proceed to the next step. When you delete a folder, this message asks you whether you want to delete all of the files in that folder. To delete all files in the folder, press the D [+(YES)] button. To cancel, press the D [-(NO)] button. Writing or reading data from the disk has failed. Try again. If you still see this message, the disk may be damaged or the disk drive may have malfunction. If you see this message while using a brand new disk, it is more likely that the disk drive is malfunctioning. Ask your Yamaha dealer for repair.