Yamaha CRX-E300 Owner's Manual - Page 24

SYSTEM CONTROL Copy time control By specifying the length of the tape, CRX-E300 programs tracks or helps you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. 1 Manual tape programming POWER REP 1 2 3 1 2 3 4 5 6 4 5 6 7 8 9 7 8 0 +10 +100 REP RANDOM PROG A B C TEXT/TIME R. TIME D E PROG R.TIME CD DUBBING MODE TAPE DIRECTION PRESET TUNER PRESET MD CD TAPE AUX MD REC/PAUSE TAPE REC/PAUSE MODE DUBBING START SLEEP DISPLAY DUBBING START VOLUME 1 Insert the desired disc into the CD player, and load a blank tape into the KX-E300. 2 Press CD. 3 Press R.TIME repeatedly to select the length of tape to be used. Each time you press R.TIME, the length of the tape changes as follows: 46 54 90 60 • You can use numeric buttons to input the length of the tape. 4 Press PROG to start programming. • "A B" appears in the display to indicate the direction of the tape. 20 5 Select the desired track number using numeric buttons. • Repeat step 5 to continue programming tracks. • The remaining time is shown on the display. If the track is longer than the remaining time, "TM Over" appears on the display. 6 Press R.TIME to continue programming tracks on side B. • Repeat step 5. 7 Choose CD = TAPE by pressing DUBBING MODE, and press DUBBING START to start recording. 2 Automatic tape programming 1 Repeat steps 1 to 3 of "Manual tape programming". 2 Press REP to start programming. • Programming is done in the order on the CD from side A to side B. When complete, the following display appears. (Example) when 11 tracks have been programmed PROG B You can change the program data following the steps described on page 15, "To change program data". 3 Choose CD = TAPE by pressing DUBBING MODE, and press DUBBING START to start recording. To stop dubbing Press & on KX-E300. To cancel tape programming Press & on CRX-E300 when dubbing is stopped.