Yamaha CS-R3 CS-R3 Owners Manual [English] - Page 14

Cscene Memory

Page 14 highlights

C SCENE MEMORY section 1 2 3 4 5 6 7 8 9 10 11 12 VIEW ASSIGN RANGE RATIO OUTGAIN THRESHOLD ATTACK ATTACK HOLD RELEASE DECAY KNEE GAIN GAIN ENCODER ASSIGN HOME GAIN GAIN OVERLAY UNDO UPDATE SCENE MEMORY PREVIEW STORE DEC INC RECALL USB RECORDING TALKBACK ON BANK / C USER DEFINED KEYS BANK / D 1 2 3 4 1 2 3 4 5 6 7 8 5 6 7 8 9 10 11 12 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 USER DEFINED KEY E1 TOUCH AND TURN 1 2 3 4 5 6 7 8 9 10 11 12 USER DEFINED KEY E2 POWER SYSTEM MONITOR A B A B SENDS ON FADER SENDS ON FADER SENDS ON FADER 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 A B OVERLAY  UNDO  UPDATE PREVIEW  SCENE MEMORY  STORE DEC INC RECALL     [OVERLAY] key Press this button to display the OVERLAY SETTING screen. While pressing and holding down the [SHIFT] key (see  on page 17), press the [OVERLAY] key to switch Overlay on or off. While Overlay is turned on, press and hold down the [OVERLAY] key to enter Overlay edit mode.  [UNDO] key Cancels the most recent scene operation of storing, recalling or updating a scene. After you cancel the operation by pressing the [UNDO] key, you can "redo" the canceled operation by pressing the [UNDO] key again. NOTE Using the [UNDO] key will not undo an operation to store a new scene.  [UPDATE] key Updates scene data by overwriting the current scene (that has been recalled most recently) with the current mix data.  [PREVIEW] key Switches Preview mode on or off.  [STORE] key Stores the current scene settings as the new settings. If you select the existing scene as the store destination, it will be overwritten. NOTE Use the [UPDATE] key to overwrite the current scene.  [INC]/[DEC] keys Enable you to select the scene number of a scene that you want to store or recall. NOTE • If you select a scene other than the current scene, the scene number on the LCD display will flash. • Press the [INC] and [DEC] keys simultaneously to return to the current scene.  [RECALL] key Enables you to recall a selected scene from scene memory. 14 CS-R3 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

CS-R3 Owner’s Manual
14
C
SCENE MEMORY section
1
[OVERLAY] key
Press this button to display the OVERLAY SETTING
screen.
While pressing and holding down the [SHIFT] key
(see
4
on page 17), press the [OVERLAY] key to
switch Overlay on or off.
While Overlay is turned on, press and hold down the
[OVERLAY] key to enter Overlay edit mode.
2
[UNDO] key
Cancels the most recent scene operation of storing,
recalling or updating a scene.
After you cancel the operation by pressing the [UNDO]
key, you can “redo” the canceled operation by pressing
the [UNDO] key again.
NOTE
Using the [UNDO] key will not undo an operation to store a
new scene.
3
[UPDATE] key
Updates scene data by overwriting the current scene
(that has been recalled most recently) with the
current mix data.
4
[PREVIEW] key
Switches Preview mode on or off.
5
[STORE] key
Stores the current scene settings as the new settings.
If you select the existing scene as the store
destination, it will be overwritten.
NOTE
Use the [UPDATE] key to overwrite the current scene.
6
[INC]/[DEC] keys
Enable you to select the scene number of a scene that
you want to store or recall.
NOTE
If you select a scene other than the current scene, the
scene number on the LCD display will flash.
Press the [INC] and [DEC] keys simultaneously to return
to the current scene.
7
[RECALL] key
Enables you to recall a selected scene from scene
memory.
DEC
INC
OVERLAY
UNDO
SCENE MEMORY
UPDATE
PREVIEW
STORE
RECALL
6
1
2
4
7
3
5