Yamaha CVP-207 Owner's Manual - Page 17
Connect the power cord., Setting the volume - lcd display
View all Yamaha CVP-207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Turning the Power On and Off Connect the power cord. 1 Insert the plugs at the ends of the cord, one into the AC INLET on the Clavinova, and the other into a standard AC outlet. In some areas, a plug adapter may be provided to match the pin configuration of the AC wall outlets in your area. Setting the volume Use the [MASTER VOLUME] dial to adjust the volume to an appropriate level. MASTER VOLUME FADE IN / OUT MIN MAX CAUTION Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged. Using headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. Two sets of standard stereo headphones can be plugged in. (If you are using only one pair of headphones, you can plug them into either of these jacks.) (The shape of plug differs depending on locale.) 2 Press the [POWER] switch. ¡ The main display appears in the LCD display. The drive lamp below the lower right end of the keyboard also lights. INPUT VOLUME MIC. LINE IN MIC. LINE PHONES MIN MAX POWER ON OFF A B C D E BALANCE CHANNEL ON OFF PART The drive lamp lights. BACK When you're ready to turn off the power, press the [POWER] switch again. ¡ Both the display and the drive lamp below the right end of the keyboard will turn off. CVP-209/207 17