Yamaha CVP-809 CVP-809/CVP-805 Reference Manual - Page 13
Editing and Saving the Effect settings, Make the necessary setting for each parameter. - data list
![]() |
View all Yamaha CVP-809 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Editing the Volume and Tonal Balance (Mixer) Insertion Effect Lets you assign the desired Insertion Effect Type for each part by touching the area above each knob. You can adjust the degree to which each Effect is applied by using the knobs. If you want to assign each of the Insertion Effects to a specific Part and select an Effect Type, touch (Setting) at the upper right of this area and make necessary settings in the window. The assignable Parts for each Insertion Effect are as follows: CVP-809 • Insertion Effect 1 - 19: Keyboard Parts, Song channels 1 - 16 • Insertion Effect 20: Microphone, Song channels 1 - 16 • Insertion Effect 21 - 28: Style Parts CVP-805 • Insertion Effect 1 - 5: Keyboard Parts, Song channels 1 - 16 • Insertion Effect 6: Microphone, Song channels 1 - 16 • Insertion Effect 7 - 8: Style Parts Variation Effect Touch [Insertion] or [System] to switch the Effect Connection between the Insertion Effect and System Effect, then touch the right end of this line to select the desired Effect type. When "System" is selected, this Effect is applied to all parts of the Song and Style as the System Effect. When "Insertion" is selected, this Effect is applied only to the specified Song/Style part. To adjust the degree to which the Effect is applied, use the knob of each part. NOTE For details about the Effect types, refer to the "Effect Type List" in the Data List (separate PDF). Editing and Saving the Effect settings You can edit the settings of the System Effects (Chorus, Reverb), Insertion Effects and Variation Effect. The edits can be saved as a User Effect type. 1 From the Mixer display, touch the desired Effect type to call up the Effect Type Selection display. 2 Select the Effect type if necessary, then touch (Setting) to call up the Effect Parameter display. 3 2 4 3 Make the necessary setting for each parameter. The available parameters differ depending on the Effect type. NOTE Parameters that are grayed out cannot be edited. 4 Touch (Save), then save the settings as a User Effect type. Up to 30 Effect types can be stored for each of the Effect Blocks. NOTICE The settings will be lost if you turn the power to the instrument off without executing the Save operation. NOTE If you want to save the Effect settings to a USB flash drive, save as a User Effect file. To do this, from the display called up via [Menu] [Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of "User Effect" to execute the Save operation (page 105). CVP-809/CVP-805 Reference Manual 13
![](/manual_guide/products/yamaha-cvp809-cvp809cvp805-reference-manual-2d254f7/13.png)