Yamaha CX-2 Owner's Manual - Page 14

REMOTE CONTROL "LEARNING" FUNCTION (U.S.A., Canada and General models of CX-2 only) The keys on this remote control transmitter can be programmed to "learn" key-functions from other remote control transmitters without losing the preset key functions. By using this feature, this unit can then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video components more convenient. Use the included user program sheets to indicate a new function learned for each key. Note There may occasionally be instances in which, due to the signal-coding and modulation employed by the other remote control transmitter, this unit will not be able to "learn" its signals. –— ˜ CHAPTER REC/PAUSE DIR A REC MUTE MUTE DIR B TAPE 1 TAPE 2 A B C D E F ˜ – TRANSMIT/LEARN indicator — YPC-USER-LEARN switch YPC: Set to this position when using preset key functions (for controlling this unit and/or YAMAHA components). * "YPC" is the abbreviation of YAMAHA Preset Code. USER: Set to this position when using "learned" key functions. LEARN: Set to this position when learning new key functions from other remote control transmitters. ˜ Blank keys These keys have no preset functions and are used only for learning other remote control transmitter's functions. ™ RESET button Press this button to "reset" the internal microcomputer which controls remote control operations. Microcomputer "reset" is necessary when the remote control freezes. * Pressing the RESET button will not erase learned functions. š CLEAR button This button is used to clear one or all learned key functions. (Refer to page 16.) ™š 14