Yamaha DDP-10 Owner's Manual - Page 24

DESCRIPTIONS OF THE FUNCTIONS 1. CENTER SPEAKER 2. REAR SPEAKER 3. MAIN SPEAKER 4. LFE/BASS OUT See pages 14 to 16 for details. (Once you have selected proper modes, you do not have to make a setting change until any alteration is made in your speaker system.) 5. LFE LEVEL (Adjusting the output level at the LFE (low frequency effect) channel) Control range: -20 dB to 0 dB (in 1 dB step) Preset value: 0 dB Adjusts the output level at the LFE (low frequency effect) channel. If the LFE signals are mixed with signals at other channels to output them from the same speakers, the ratio of LFE signal level to the level of other signals are adjusted. (See page 3 for details about the LFE channel.) 6. CENTER DELAY (Adjusting the delay of center sounds (dialog etc.)) Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms Adjusts the delay between the main sounds (at the main channels) and dialog etc. (at the center channel). The larger the value, the later the dialog etc. is generated. This is for making sounds from the left main, center and right main speakers reach your listening position at the same time by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the left or right main speaker to your listening position. 7. SURROUND DELAY (Adjusting the delay of rear surround sounds) Control range: 0 ms to 15 ms (in 1 ms step) Preset value: 15 ms Adjusts the delay between the main sounds (at the main channels) and surround sounds. (at the rear channel). The larger the value, the later the surround sounds is generated. 20