Yamaha DPX-530 Owner's Manual - Page 26

2. SETUP menu ITEM KEYSTONE AUTO POWER ON AUTO POWER OFF SPLASH SCREEN HIDE SCREEN COLOR LAMP MODE LOCATION SETTING ±20 ON / OFF OFF / 5 - 60min ON / OFF BLUE / BLACK BRIGHT CINEMA FRONT / TABLE REAR / TABLE REAR / CEILING FRONT / CEILING FUNCTION Use to correct vertical keystone distortion. When ON is selected, the lamp is automatically lit when the power cable is plugged in the wall outlet. The projector is in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp. Use to set the time elapsed before the projector enters the stand-by mode when there is no signal input from the source. Select ON to display the splash screen when the power is turned on Use to change the color of the screen that appears when no signal is received. Select when using the projector in a bright environment. Select to moderate the intensity of the lamp. The operating sound is reduced and the lamp lifetime becomes longer. Frequent switching of the lamp mode may damage the lamp. Select when viewing images from the front with the projector installed on the floor. Select when viewing images projected from behind of the screen with the projector installed on the floor. Select when viewing images projected from behind of the screen with the projector installed on the ceiling. Select when viewing images from the front with the projector installed on the ceiling. 3. INITIAL menu ITEM SETTING MENU POSITION 2 positions PROGRESSIVE MODE AUTO VIDEO COLOR SYSTEM 8 positions ASPECT LANGUAGE RESET ALL DEFAULT NORMAL SQUEEZE ZOOM THROUGH 10 languages EXECUTE FUNCTION Use to change the position of the menu. The film mode will be automatically activated when a film source signal is inputted. The film mode will not be activated. When AUTO is selected, the appropriate video format is automatically selected depending on the input signal. If the image isn't displayed correctly, select the desired video format manually. The appropriate aspect ratio is automatically selected depending on the input signal. Select DEFAULT for normal use. Select to project images with an aspect ratio of 4:3 when the input signal is 4:3 image. Select to project images with an aspect ratio of 16:9. Select to enlarge and project images of CinemaScope size or Vista size. Select to project images in their original size as input. Not available when the keystone adjustment is applied. Use to select the language used in the menus. Use to reset the settings of the menu (excluding LANGUAGE) to the factory setting values. 22