Yamaha DSP-A590 Owner's Manual - Page 14

BALANCE, CENTER LEVEL, REAR LEVEL, Notes, VOLUME, PHANTOM, U.K., Europe and Australia models only

Page 14 highlights

9 12 10 11 REC PAUSE DIR A PLAY DIR B TAPE MON TEST STOP LD/TV PRO LOGIC ENHANCED CNCT VIDEO VCR 1 CENTER SUR. LEVEL MONO MOVIE STADIUM DISCO VCR 2 ROCK HALL EFFECT ON/OFF V AUX REAR LEVEL DELAY TIME VOLUME 9 Adjust the BALANCE control so that the effect sound output level of the left front speaker and the right front speaker are the same. BALANCE 0 l l 2 2 3 3 4 L5 4 5R 10 Adjust the sound output level of the center speaker to be at the same level as that of the front speakers with the CENTER LEVEL keys. Lights up. CENTER LEVEL CENTER 00 TEST Adjustable 11 Adjust the sound output level of the rear speakers to be at the same level as that of the front speakers with the REAR LEVEL keys. Lights up. REAR LEVEL 0 REAR TEST 12 Cancel the test tone. TEST TEST R Stops flashing and disappears Notes q Once you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the VOLUME keys on the remote control transmitter). q If you use external power amplifiers, their volume controls may also be adjusted to achieve proper balance. q In step 10, if the center channel mode is in the "PHANTOM" position, the sound output level of the center speaker cannot be adjusted. This is because in this mode, the center sound is automatically output from the left and right front speakers. < > q U.K., Europe and Australia models only If there is insufficient sound output from the center and rear speakers, you may decrease the front speaker output level by setting the FRONT LEVEL switch on the rear panel to "-10 dB". Adjustable 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

14
9
Adjust the
BALANCE
control so that the effect sound
output level of the left front speaker and the right front
speaker are the same.
10
Adjust the sound output level of the center speaker to
be at the same level as that of the front speakers with
the
CENTER LEVEL
keys.
11
Adjust the sound output level of the rear speakers to
be at the same level as that of the front speakers with
the
REAR LEVEL
keys.
12
Cancel the test tone.
Stops flashing and disappears
Notes
Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the
VOLUME
control (or the
VOLUME
keys on the remote
control transmitter).
If you use external power amplifiers, their volume controls
may also be adjusted to achieve proper balance.
In step 10, if the center channel mode is in the
PHANTOM
” position, the sound output level of the center
speaker cannot be adjusted.
This is because in this mode,
the center sound is automatically output from the left and
right front speakers.
<
U.K., Europe and Australia models only
>
If there is insufficient sound output from the center and
rear speakers, you may decrease the front speaker output
level by setting the
FRONT LEVEL
switch on the rear
panel to “–10 dB”.
BALANCE
5
5
4
3
2
l
0
l
2
3
4
L
R
9
12
10
11
CENTER
LEVEL
00
CENTER
TEST
REAR
LEVEL
0
REAR
TEST
TEST
R
TEST
Lights up.
Adjustable
TAPE MON
DIR B
PLAY
DIR A
REC PAUSE
LD/TV
STOP
TEST
VCR 1
CNCT VIDEO
ENHANCED
PRO LOGIC
VCR 2
DISCO
STADIUM
MONO MOVIE
CENTER
LEVEL
V
AUX
EFFECT
ON/OFF
HALL
ROCK
VOLUME
REAR
LEVEL
SUR.
DELAY TIME
Lights up.
Adjustable