Yamaha DSP-AX620 Owner's Manual - Page 42

REMOTE CONTROL FEATURES It is possible to control this unit and other YAMAHA A/V components using the remote control supplied with this unit. It is also possible to control components from other manufacturers (or some YAMAHA components) by setting the proper manufacturer code (a signal assigned to each manufacturer and component). Note • For the notes on batteries, operating distance and names and functions of the remote control, refer to each description in this manual. Selector Dial Select the component (position) to be controlled by the remote control. For example, if the CD position is selected, the remote control is set in the CD operation mode, allowing the CD player to be controlled. When turning the selector dial, the position changes as follows: AMP/TUN You can perform the basic operations of this unit. CD The code for a YAMAHA CD player is factory-set. CBL/SAT A cable TV or satellite tuner can be controlled. VCR A VCR can be controlled. Selector dial TAPE/MD The code for a YAMAHA MD recoder is factoryset. Be sure to set the proper code when operating a CD recorder or tape deck. DVD/LD & DVD MENU An LD player can be controlled in the DVD/LD position. A DVD player can be controlled in the DVD/LD and DVD MENU positions. The code for a YAMAHA DVD player is factory-set. TV A TV can be controlled. Notes DSP/TUN This unit can be controlled and DSP programs can be selected directly. • The general operational buttons on the remote control differ depending on the position of the selector dial. See the following pages for details. • When shipped from the factory, the YAMAHA manufacturer codes listed on page 46 are set for each dial position. If unable to operate your YAMAHA A/V component, please try using another YAMAHA code. 40