Yamaha DTX-3000 Quick Connect Guide - Page 1

Quick-Connect Guide DTX-3000 Home Theater in a Box YHT home theater Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect Guide will help you get started. Follow the steps to connect the speakers first. Then connect your Receiver, DVD Player and other components. Refer to your Owner's Manuals as well as those that came with your other components for complete instructions and precautions. Be sure that all components are not plugged in while making connections. You will need the following which are not included in the package: Phillips screwdriver, wire cutter/stripper. Brackets, toggle bolts, molly anchor screws or sheet metal screws are optional.  1 Your  System 2 Room Layout  (15)   (5) (5)  (5) (2)     Inspect Contents After unpacking, inspect the contents to confirm you have the above items:  two front speakers,  three surround speakers,  one center speaker,  powered subwoofer,  HTR-5740 A/V Receiver with remote control,  DV-C6660 DVD Player with remote control,  speaker wire,  RCA cable,  audio/video RCA cable,  optical cable,  non-skid pads,  screws,  support bases, and  fasteners. Also included, but not shown, are AM and FM antennas and three related Owner's Manuals. 3 4 Speaker Placement After connection of the speakers place them so they appear in the approximate positions as shown in the diagram above. 5 6 Connect Center Speaker Wire Cut speaker wire  to appropriate lengths for all speaker connections. Connect speaker wire for center speaker . The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. (See your HTR-5740 Owner's Manual for more information on speaker wire connections.) 7 Connect Front and Surround Speaker Wire Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. Front and Surround Speaker Assembly Attach Bottom Pads Apply pads  to bottom of speaker stand as shown. 8 Attach Adapter to the Speaker using the supplied screw . Thread Speaker Wire Pass the speaker wire through the underside of speaker stand. Turn Speaker Stand Right-Side-Up Remove screw that holds adapter in, carefully set aside, then remove adapter from speaker stand. Thread Speaker Wire Make sure speaker wire continues to pass through the adapter. 11 HTR-5740 Receiver Receiver Connections Connect Speakers Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. CAUTION Receiver must not be plugged in while connecting speakers. FRONT RIGHT LEFT CENTER SURROUND BACK SURROUND RIGHT LEFT 12 13 Antenna Connection AM Loop Antenna Indoor FM Antenna Subwoofer YST-SW030 Subwoofer 9 Push Together the speaker and adapter into the 10 Mounting Speakers to Wall (Optional) Fasten mounting screws Connection speaker stand. Attach adapter to into a firm wall or wall support. Leave 7/32 in. the speaker stand between head and wall. using the screw Hang the keyholes on that was set the speaker backs on the aside in Step 6. protruding screws. WARNING Please contact a reliable source about the best type of hardware for your particular wall's construction. Secure installation is purchaser's responsibility. See your owner's manual for additional precautions. HTR-5740 Receiver Connect RCA Cable Connect RCA cable  to subwoofer . Set subwoofer VOLUME control to half-way mark and POWER to OFF. Connect RCA cable to receiver from subwoofer. WARNING Components must not be plugged in while connecting them. HTR-5740 Receiver Connect Antennas to Receiver Locate AM loop antenna and indoor FM antenna. Keeping receiver unplugged, connect as shown. For more information about obtaining clear reception and grounding, see your Owner's Manual.