Yamaha DTX10K-X DTX10K-X DTX10K-M Assembly Manual - Page 1
Yamaha DTX10K-X Manual
View all Yamaha DTX10K-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
ELECTRONIC DRUM KIT DTX10K-X DTX10K-M Assembly Manual EN Manual Development Group © 2020 Yamaha Corporation Published 08/2020 POMA*.*- **A0 VDR6920 Thank you for purchasing the Yamaha ELECTRONIC DRUM KIT DTX10K-X or DTX10K-M. This electronic drum kit can be used in your home or a studio, or onstage for live performances. For proper assembly and safe use, read this assembly manual carefully before using it. After you have read the manual, keep it in a safe and handy place for future reference. This manual describes the standard assembly procedure for the DTX10K-X/DTX10K-M electronic drum kits. It covers assembly, wiring and setting up the drum trigger module of the kit. The illustrations show the DTX10K-X electronic drum kit, but the information applies to the DTX10K-M (except where indicated). Example of standard assembly Cymbal pad Real hi-hat pad Tom pads Cymbal pad Cymbal pad IMPORTANT This manual describes the process of assembling a pad set and drum trigger module to an already assembled RS10-HXR Electronic Drum Rack. Before starting the steps below, therefore, be sure to assemble your RS10-HXR as described in the Owner's Manual that came with it. NOTICE Lay a drum mat (sold separately) on the floor underneath the hi-hat stand and the kick pad. Alternatively, you can place cardboard from the drum kit packaging or the like on the floor to prevent it from being scratched. Hi-hat stand DTX-PROX Drum trigger module Tom pad Electronic drum rack 1 Open the boxes to reveal their contents. After opening up the packages containing your electronic drum kit, verify that all of the following components are present. Components of both DTX10K-X and DTX10K-M PCY135 Cymbal Pad (×1) PCY155 Cymbal Pad (×1) PCY175 Cymbal Pad (×1) RHH135 Real Hi-hat Pad (×1) Stand base for RHH135 (×1) Hi-hat clutch for RHH135 (×1) RS10-HXR Electronic Drum Rack (×1) RS10-HXR Owner's Manual (×1) Drum key (×1) HS740A Hi-hat Stand (×1) Stopper for Cymbal KP128 Kick Pad Pad (×3) (×1) Spare patch for KP128 (×2) Anti-slip stopper for KP128 (incl. spring) (×2) SS662 Snare Stand (×1) CH755 Cymbal Holder (×3) Cable band (×9) DTX-PROX Drum Trigger Module (×1) Tom Holder (×3) Ten-channel snake cable (×1) XP105T-X XP105T-M XP125T-X XP125T-M XP125SD-X XP125SD-M Owner's Manual (×1) Cable band for RHH135 (×1) Module holder (×1) Module holder screw (×4) Drum key (×1) DTX10K-X DTX10K-M Assembly Manual (this leaflet; ×1) PCY100 PCY135 PCY155 PCY175 Owner's Manual (×1) RHH135 Owner's Manual (×1) KP128 Owner's Manual (×1) AC adaptor (×1) * May not be included depending on your particular area. Check with your Yamaha dealer. DTX-PROX Owner's Manual (×1) Cubase AI Download information (×1) DTX10K-X only DTX10K-M only XP125SD-X Snare Pad (×1) XP125T-X Tom Pad (×1) XP105T-X Tom Pad (×2) XP125SD-M Snare Pad (×1) XP125T-M Tom Pad (×1) XP105T-M Tom Pad (×2) Snare pad Kick pad Snare stand 2 Assemble the RS10-HXR Electronic Drum Rack. For instructions on how to assemble the RS10-HXR Electronic Drum Rack, refer to the Owner's Manual that came with it. 3 Assemble the pads and the drum trigger module to the electronic drum rack. PRECAUTIONS Please read carefully before proceeding The purpose of the precautions detailed below is to ensure that this electronic drum kit can be used safely without fear of injury or property damage. Precautions are extremely important in terms of ensuring safety, and therefore, they should be fully observed. * After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for future reference. * Be sure to also read the Assembly Manuals and/or Owner's Manuals that came with your pads and rack. CAUTION Failure to observe the precautions described below can result in injury and/or property damage. • Assemble this product in the proper sequence by following the assembly instructions in this manual. Also, make sure to tighten the bolts regularly. Failure to do so might result in damage to the product or even injury. • Do not let small children assemble or set up this product by themselves, or they can be injured. Always assemble this product with adult supervision. • Be careful with the edges of the cymbal holders and the tom holders. The sharp holder ends can result in injury. • The stoppers at the tip of the legs, anti-slip stoppers on kick pads and on foot pedals have sharp tips. In order to avoid injury, therefore, you should take special care whenever handling these components. • Be sure to securely tighten bolts and other fasteners when setting up this product. In addition, be sure to proceed slowly when loosening bolts. If this precaution is not observed, pads can fall off or the rack can collapse or fall over, possibly causing injury. • Do not place the product in an unstable position where it might accidentally fall over. • Whenever setting up this electronic drum kit, ensure that cables and the like are arranged safely. If someone were to trip on a cable, the kit could topple over and cause injury. • Do not alter the product. Doing so can result in injury or damage/deterioration to the product. * The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your product. * The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. * The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer. CAUTION Failure to observe the precautions described below can result in injury and/or property damage. • Do not sit or step on the rack. The rack can overturn or be damaged, resulting in injury. • Be careful with your fingers and hands when adjusting clamps, to prevent them from becoming pinched and injured. • Be careful around pipe ends and inside. Metal shavings, etc. can injure your fingers and hands. • Do not place hands or feet under a hi-hat stand, kick pad or foot pedal. Doing so could result in injury. • Keep small parts out of the reach of infants. Your children may accidentally swallow them. • Do not go near the product during an earthquake. Strong shaking during an earthquake could cause the product to move or tip over, resulting in damage to the product or its parts, and possibly causing injury. • When transporting or moving the product, always use two or more people. Attempting to lift the product by yourself may damage your back, result in other injury, or cause damage to the product itself. NOTICE: Usage Precautions • When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In addition, avoid placing heavy items on top of cables and do not allow them to touch sharp edges. Failure to avoid these precautions can lead to cable breakage and disconnection. • Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe this precaution can result in malfunction. • Do not use or keep the product in places with extremely high temperature (places in direct sunlight, close to a heater, in a closed car, etc.) or high humidity (bathroom, outside on a rainy day, etc.). Doing so can result in deformation, discoloration, damage or deterioration. • When cleaning the product, use a soft and dry/slightly damp cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-impregnated wiping cloths. Assembling the cymbal holders 1. Assemble the cymbal holders (CH755 × 3) on the electronic drum rack as shown below, and then tighten the fixing bolt to secure the holder in place. NOTE You can change the position of a position clamp to mark the settings for future setups and to prevent unintentional changes during musical performances. Make sure to secure the position clamp using the drum key after moving the clamp. CH755 CH755 CH755 Position clamp Fixing bolt 1 Assembling the tom pads XP105T 2. Push the tom pads onto the tom holder's rods. Leave a gap of about a half inch between the base of the tom holder and the tom pad, and then tighten the wing bolt to secure the pad in place. Tom pad Rod section Leave a gap Wing bolt XP125T Insert Tom holder 1. Assemble the tom holders (×3) on the electronic drum rack as shown above, and then tighten the fixing bolt to secure the holder in place. Tom holders Tom holder Fixing bolt 3. Loosen wing bolts A to B and fixing bolts C to D as shown be- low to adjust the height and angle of any of the pads. When correctly positioned, be sure to securely retighten the bolts before proceeding to the next step. Wing bolt A Wing bolt B Fixing bolt D Fixing bolt C NOTICE Before every playing, tighten the drum key bolts so that there is no rattling and loosening of the head, in order to prevent malfunction. Refer to the "Head tension adjustment" in the XP105T-X XP105TM XP125T-X XP125T-M XP125SD-X XP125SD-M Owner's Manual. Continued on other side