Yamaha DTX920K DTX760K/DTX920K Assembly Manual - Page 1

ELECTRONIC DRUM KIT DTX760K/DTX920K Assembly Manual EN Manual Development Department ©2015 Yamaha Corporation Published 10/2015 POTO*.*-**A0 Printed in Japan ZT57980 This manual describes the standard assembly procedure for the DTX760K/DTX920K electronic drum kits. It covers assembly and wiring of the kit as shown below. When you have completed all of the steps described, you will be ready to turn on the drum trigger module and start playing. Illustrations show the DTX700 drum trigger module. Example of standard assembly PCY135 (Cymbal Pad) CH750 (Cymbal Holder) PCY155 (Cymbal Pad) CH750 (Cymbal Holder) IMPORTANT • For assembly, you will require four individual packages - an RS700 Rack System, a DTP903 Pad Set, a DTP904 Pad Set, and a DTX700/ DTX900M Drum Trigger Module. • This manual describes the process of assembling a drum-pad set and drum trigger module to an already assembled RS700 Electronic Drum Rack. Before starting the steps below, therefore, be sure to assemble your RS700 as described in the Owner's Manual that came with it. RHH135 (Real Hi-hat Pad) DTX700/DTX900M Drum Trigger Module XP100T (Tom Pad) PCY135 (Cymbal Pad) CH755 (Cymbal Holder) NOTICE Before starting assembly, lay a drum mat (sold separately) on the floor. Alternatively, you can place cardboard from the drum kit packaging or the like on the floor to prevent it from being scratched. This is particularly important when using the HS740A Hi-hat Stand and KP100 Kick Pad. HS740A (Hi-hat Stand) XP120T (Tom Pad) XP120SD (Snare Pad) SS662 (Snare Stand) KP100 (Kick Pad) RS700 (Rack System) Safety Precautions Please read carefully before proceeding. The purpose of the precautions detailed below is to ensure that this electronic drum kit can be used safely without fear of injury or property damage. As a means of indicating the severity and immediacy of any risk of injury or property damage resulting from incorrect operation, these precautions are classified as either WARNING or CAUTION. The instructions displayed together with these precautions are extremely important in terms of ensuring safety, and therefore, they should be fully observed. * After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for future reference. * Be sure to also read the Assembly Manuals and/or Owner's Manuals that came with your pads and rack. WARNING Failure to observe the precautions described below can result in serious injury or even death. • Young children using this electronic drum kit should be supervised by a guardian to eliminate any possibility of injury. • Holders for cymbal and tom pads have sharp tips. In order to avoid injury, therefore, you should take special care whenever handling these components. • The anti-slip stoppers on kick pads and foot pedals have sharp tips. In order to avoid injury, therefore, you should take special care whenever handling these components. • Be sure to securely tighten nuts and other fasteners when setting up this electronic drum kit. In addition, be sure to proceed slowly when loosening nuts. If this precaution is not observed, pads may fall off or the rack may collapse or fall over, possibly causing injury. • Do not setup this electronic drum kit on a slope, on an unstable platform, or on any other unsafe surface. If this precaution is not observed, it may topple over or fall, possibly causing injury. • Whenever setting up this electronic drum kit, ensure that cables and the like are arranged safely. If someone were to trip on a cable, the kit could topple over and cause injury. • Under no circumstances should this electronic drum kit be disassembled or customized. Failure to observe this precaution can result in injury or malfunction. • Do not sit or stand on the rack. Doing so could cause it to fall over or break, possibly causing injury. CAUTION Failure to observe the precautions described below can result in injury and/or property damage. • Mind your fingers when adjusting clamps. They can easily be crushed if care is not taken during this operation. • Be careful with the tips of supports, arms, screws, and the like. Fingers can easily be injured by sharp tips if these components are not handled carefully. • Do not place hands or feet under a kick pad or foot pedal. Doing so could result in injury. • Do not use the electronic drum kit's rack to hold acoustic drums. Doing so could cause clamps to break and the drums to fall off, which in turn could lead to injury. NOTICE: Usage Precautions • When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In addition, avoid placing heavy items on top of cables and do not allow them to touch sharp edges. Failure to avoid these precautions can lead to cable breakage and disconnection. • Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe this precaution can result in malfunction. • Avoid using or storing the electronic drum kit in very hot locations (i.e., in direct sunlight, in close proximity to a heater, or in a closed vehicle) or in highly humid locations (i.e., in a bathroom or outdoors in wet weather). Failure to observe this precaution can lead to warping, discoloration, malfunction, or breakdown. • Avoid cleaning the electronic drum kit with organic solvents, paint thinner, or alcohol as these substances can cause warping and discoloration. Instead, we recommend you remove dust using a soft dry cloth or wipe clean using a moist, tightly-wrung cloth. If the electronic drum kit is very dirty, first wipe the dirt away using a cloth moistened with a neutral detergent solution and tightly wrung. Following this, wipe away the detergent solution using a cloth soaked in water and tightly wrung. * Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. 1 Assemble the RS700 Electronic Drum Rack. For instructions on how to assemble the RS700 Electronic Drum Rack, refer to the Owner's Manual that came with it. 2 Open the boxes to reveal their contents. Package 1: DTP903  PCY135 Cymbal Pad (x2)  PCY155 Cymbal Pad (x1)  RHH135 Real Hi-hat Pad (x1)  Stand base for the RHH135 (x1) Package 2: DTP904  XP120SD Snare Pad (x1)  XP100T Tom Pad (x2)  XP120T Tom Pad (x1)  CH750 Cymbal Holder (x2)  KP100 Kick Pad (x1)  SS662 Snare Stand (x1)  Hi-hat clutch for the RHH135 (x1)  Cable band for the RHH135 (x1)  2.5m stereo phone cables (x4)  4m stereo phone cables (x6)  Stoppers for the PCY135 and PCY155 (x3)  Felts for the PCY135 and PCY155 (x3)  KP100 Owner's Manual (x1)  PCY100/PCY135/PCY155 Owner's Manual (x1)  RHH135 Owner's Manual (x1)  Tuning key (x1)  Cable bands (x10)  Clamp bolts (x3)  CH755 Cymbal Holder (x1)  HS740A Hi-hat Stand (x1)  XP100T/100SD/120T/120SD Owner's Manual (x1)  Assembly Manual (this pamphlet) Package 3: DTX700/DTX900M  DTX700/DTX900M Drum Trigger Module (x1)  Module holder (x1)  Module holder screw (x4)  AC power adaptor* (x1) * May not be included depending on your particular area. Please check with your Yamaha dealer.  DTX700/DTX900M Owner's Manual (x1)  DTX700/DTX900M Data List (x1) 3 Assemble the pads and the drum trigger module to the electronic drum rack. Assembling the cymbal holders 1. Assemble the cymbal holders (CH750 x 2, CH755 x 1) on the electronic drum rack as shown below. Assembling the tom pads XP100T CH750 CH750 CH755 2. Push the tom pads onto the rack's clamp rods. Ensure that the rod section is fully inserted into the each pad's mounting hole, and then tighten the clamp bolt to secure the pad in place. Tom pad Rod section Clamp rod XP120T 1. Attach the clamp bolt to each of the tom pads and provisionally tighten (by 5 or 6 turns). Clamp bolt (tighten in the direction of the arrow) Tom pad (rear side) Clamp bolt Insert 3. Loosen clamp bolts A to E as shown below to adjust the height and angle of any of the pads. When correctly positioned, be sure to securely retighten the bolts before proceeding to the next step. Clamp bolt B Clamp bolt D Clamp bolt E Clamp bolt A Clamp bolt C Continued on other side