Yamaha ELB-01 Assembly Instructions - Page 4

9 Place the music rest on the Electone. 10 Turn on the Electone's power switch and confirm that the Electone can be played, and that the assembly is successful. After completing the assembly, please check the following items. • Are there any parts left over? → Review all assembly procedures. • Is the Electone clear of doors and other movable fixtures? → Move the Electone to an appropriate location. • Does the Electone make a rattling noise when you shake it? → Tighten all screws. • Can the Electone be turned on? → Confirm that the AC power cord plug is securely connected to an appropriate power outlet. • Does the Electone produce sounds? → Confirm that the Speaker cord plug and the Pedalboard cord plug are securely connected to each socket on the Main unit. If the Electone creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly instructions and tighten all screws again. BENCH ASSEMBLY Turn the bench board over and put the legs in place, one by one, at the corners of the bench board, then tighten each nut using the included wrench. Be sure to put the washer between each leg and nut as shown. Leg Washer Bench Nut board 4 ELB-01 Assembly Instructions U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2005 Yamaha Corporation WF43900 510MWAP3.3-01A0 Printed in China