Yamaha EMX88S Owner's Manual - Page 23

Using the digital effect 21 No. Program REVERB HALL REVERB ROOM REVERB PLATE REVERB VOCAL 1 REVERB VOCAL 2 VOCAL ECHO 1 VOCAL ECHO 2 DELAY 1 DELAY 2 EARLY REF. GATE REVERB VOCAL DOUBLER SYMPHONIC FLANGE DISTORTION TAP DELAY Description Reverberation simulating a spacious expanse such as a concert hall. Reverberation simulating the acoustics of a small room. Simulation of a plate reverb device. Produces a hard-sounding reverberation. Ideal reverb for vocals. Ideal echo for vocals. Delay effect that delays the signal. An effect produced by modifying the early reflections. It lets you add depth to the sound, or create echo-like effects. An effect produced by cutting the reverberation. Produces an effect as though two people were singing. Gives a richly layered depth to the sound. Adds a sense of pitch to the tone. Effective on sounds that contain numerous overtones. The well-known effect used to distort the sound. This effect sets the delay time to the interval at which you actually press the switch. The amount of feedback can be adjusted by the PARAMETER control. The LED will blink in synchronization with the delay time. Controllable parameter Parameter Reverb time Variable range 0.3-10.0s Reverb time 0.3-3.2s Reverb time 0.3-10.0s Reverb time 0.3-10.0s Delay time 0-800ms Delay time 0-800ms Room size 0.1-10.0 Room size Pitch fine 0.1-5.0 0-50 Depth Modulation frequency Drive Feedback gain Delay time 0-100% 0.05-4.00Hz 0-100 0-99% 100ms (600bpm)- 2690ms (22.3bpm)* * The LED can not blink any faster than an interval of 256 ms (234.3 bpm). EMX88S/EMX68S-Owner's Manual