Yamaha EZ-30 Owner's Manual - Page 77
Available MIDI Functions, MIDI Terminals, MIDI LSB receive cancel
View all Yamaha EZ-30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
MIDI Terminals In order to exchange MIDI data between multiple devices, each device must be connected by a cable. The MIDI terminals of the EZ-30 are located on the rear panel. • MIDI IN Receives MIDI data from another MIDI device. • MIDI OUT Transmits the EZ-30's keyboard information as MIDI data to another MIDI device. MIDI LSB receive cancel To set the EZ-30 so that it will not receive LSB data for Bank Select, press the [STANDBY/ON] switch to turn on the power to the EZ-30 while holding down the lowest key (C1). To cancel this setting, turn on the power to the EZ-30 again in the normal manner. Available MIDI Functions The EZ-30 has MIDI IN/OUT terminals on the rear panel. Using the MIDI functions can expand your possibilities for creating and playing music. q Playing on a MIDI keyboard (without an internal tone generator) can produce sound on the EZ-30. EZ-30 (without an internal tone generator) MIDI reception MIDI IN MIDI OUT MIDI Keyboard q You can record performance data created on the EZ-30 (performance using the keyboard and auto accompaniment: 1-16 channels) to an external sequencer (such as sequence software on a computer). You can then edit the performance data on the external sequencer and play it again on the EZ-30. EZ-30 MIDI transmission Editing and arranging after recording MIDI OUT MIDI IN MIDI IN MIDI OUT ¡ Initial send (See page 81.) MIDI reception (playback) Personal Computer, Sequencer 77