Yamaha EZ-300 EZ-300 Owners Manual - Page 65
Appendix, Problem, Possible Cause and Solution
View all Yamaha EZ-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Troubleshooting Problem • The volume is too soft. • The sound quality is poor. • The rhythm stops unexpectedly or will not play. • The recorded data of the Song, etc. does not play correctly. • The LCD display suddenly goes dark, and all panel settings are reset. Power suddenly and unexpectedly turns off. When the instrument is turned on, power is turned off suddenly and unexpectedly. The application on your smart device doesn't recognize the instrument. Possible Cause and Solution The batteries are low or dead. Replace all six batteries with completely new ones, or use the included AC adaptor. This is normal and the Auto Power Off function may have been activated (page 15). If you need to disable the Auto Power Off function, select "Off" in the Function settings (Function 063; page 63). The protection circuit has been activated due to over current. This may occur when an AC adaptor other than the one specified is used, or an AC adaptor is damaged. Use the specified adaptor (page 94) only. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. Is Storage Mode set to ON? Make sure that Storage Mode is set to OFF; refer to the function settings on page 63 (Function 059). Appendix EZ-300 Owner's Manual 65