Yamaha F01 Owner's Manual - Page 51

ENGLISH Connections Connections Connectors CAUTION Before connecting the F11/F01 to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may result. 1 2 (F11) R LL R AUX OUT 3 R LL R AUX IN 4 5 OUT IN TO DEVICE LAN MIDI USB 1 AUX OUT[L/L+R][R] jacks You can connect these jacks to a stereo system to amplify the F11/F01 or to a cassette tape recorder to record your performance. Refer to the diagram below and use audio cables to make the connections. CAUTION When the F11/F01's AUX OUT jacks are connected to an external audio system, first turn on the power to the F11/F01, then to the external audio system. Reverse this order when you turn the power off. Digital Piano Stereo R LL R AUX OUT AUX OUT phone plug (standard) audio cable AUX IN phone plug (standard) NOTE Use audio cables and adaptor plugs with no resistance. NOTE When the sound from the AUX OUT jacks is routed to the AUX IN jacks, the input sound will be output from the speaker of the F11/F01. The output sound may be excessively loud and may cause noise. NOTE Use only the AUX OUT [L/L+R] jacks for connection with a mono device. 2 AUX IN[L/L+R][R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the F11/F01's speakers. Refer to the diagram below and use audio cables to make the connections. NOTE The F11/F01's [VOLUME] control setting affects the input signal from the AUX IN jacks, but the [REVERB] setting does not. NOTE Use only the AUX IN [L/L+R] jack for connection with a mono device. F11/F01 Owner's Manual 51