Yamaha GEP50 GEP50 Owners Manual Image - Page 8

2: GENERAL OPERATION /MEMORY CONFIGURATION / The GEP50 has a total of 100 internal memory locations. Locations 1 through 50 are READ-ONLY MEMORY containing the 50 preset effect programs. These locations cannot be written to or changed in any way. The effect programs con-• tained in memory locations 1 through 50 are: MNeom. . Program Name MNeom. . Program Name 1 Mid-Band Drive 26 Rev 2 Hall 2 Heavy Metal 27 Rev 3 Room 3 Punk Dist. 28 Rev 4 Vocal 4 Light Dist. 29 Rev 5 Vocal 5 Hard Overdrive 30 Rev 6 Plate 6 Chunky Rhythm 31 Early Ref. 1 7 Sweet Sustain 32 Early Ref. 2 8 Punchy Lead 33 Early Ref. 3 9 Smooth Drive 34 Early Ref. 4 10 Overdrive Hall 35 Delay Short 11 Distortion Room 36 Delay Long 12 Live Dist. 37 Echo Short 13 E/R Distortion 38 Echo Long 14 Slide Gate 39 Stereo Flange 15 Slow Gate Dist. 40 Chorus 16 Reverse Dist. 41 Stereo Phasing 17 Delay Dist. 42 Symphonic 18 Dist. Filter 43 Gate Reverb 19 Double Dist. 44 Reverse Gate 20 Max-Delay Dist. 45 Compressor 21 Flange Dist. 46 Rev & Gate 22 Chorus Dist. 47 Pitch A 23 Phase Dist. 48 Pitch B 24 Symphonic Dist. 49 Pitch C 25 Rev 1 Hall 50 Parametric EQ A complete description of each effect program and its parameters is given in "3: DESCRIPTIONS OF THE EFFECT PROGRAMS & THEIR PARAMETERS" ON PAGE 13. Locations 51 through 00 are READ/WRITE MEMORY which can be used to store your own edited versions of the preset programs. / SELECTING ANEFFECT/MEMORY LOCATION C:), Press the MEMORY button to engage the memory selection mode. This is not necessary if the memory selection mode is already active, but it's a good habit to get into to ensure smooth operation. 02 Press the Q or V button to increment or decrement the memory location number shown on the LED display. Hold either of these buttons down for continuous incrementing or decrementing. The name of the program corresponding to the currently selected memory location will be shown on the LCD, or "*** NO DATA will be displayed if a mem- ory location between 51 and 00 is selected into which an edited effect program has not been stored. Note that at this 9. GEP50 GUITAR EFFECT PROCESSOR stage the LED memory number display is flashing, indicating that although a new location has been selected, its contents have not yet been recalled. 0 When the desired memory location/effect has been selected, press the RECALL button. The LED memory number display will stop flashing and the selected effect will be engaged. MEMORY Rev 2 Hal l Distortion Room RECALL Selected Effect 03 • Distortion Room I