Yamaha GW50 Owner's Manual - Page 43
chord types for all keys. These chord types
View all Yamaha GW50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
GUIDED TOUR (TUTORIAL) While the pattern is playing, press Pedal Switch 2. The chord changes as soon as you press the Pedal Switch, and the new chord is shown in the display. Press the other Pedal Switches (1-4) to change to other chords. (These are the factory-assigned chord settings for the Pedal Switches.) Try doing this in time with the rhythm as well. Note: Be careful not to press Pedal Switch 5 here, since it does not change the chord, but starts or stops the pattern. 8. While the pattern is still playing, try using the chord section at the top right of the panel to select some other chords. First, let's change the root note of the chord. To do this, press the Chord button corresponding to the desired note (written above the button). This mark is used to represent " " or "sharp." If the root note that you want isn't selected (each button has more than one root note), press it again until the note is selected. Next, let's change the chord type. Remember that the GW50 gives you a total 25 different chord types for all keys. These chord types are shown below the Chord buttons. Note: For more information about the chord types, see the lists of chord types on pages 76 and 152. To select a different chord type, simultaneously hold [CHORD] and press the Chord button corresponding to the desired type (written below the button). Press it repeatedly until the desired chord type is shown in the LCD. For example, hold [CHORD] and press [D/E /E] until the "m" chord is selected. 34 BACKING SECTION