Yamaha HA-G1 Owner's Manual - Page 2
Using The Ha-g1, Battery Replacement, Precautions, Specifications - guitar headphone amplifier
View all Yamaha HA-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
HA-G1 HEADPHONE AMPLIFIER Owner's Manual Thank you for purchasing the Yamaha HA-G1 Headphone Amplifier. The HA-G1 contains a 2 mode (clean/drive) headphone guitar amp. With a guitar and headphones connected to the HA-G1, you can easily enjoy realistic guitar sound anywhere. Connecting a CD, MD or cassette player to the HA-G1 allows you to play or practice along with an external audio source. To thoroughly understand the functions of, and obtain long life from your HA-G1, please read this owner's manual before using. I PRECAUTIONS N To avoid possible damage do not expose the unit to: - direct sunlight - very high or low temperature/humidity - sand or excessive dust * Especially inside a vehicle, the temperature may rise excessively - do not leave the HA-G1 in your parked car on a sunny day! N Always set the VOLUME to "0" or remove the headphones before making any connections or turning the power ON/OFF. N Always turn the unit off after use. To avoid battery leakage, remove the batteries when the unit is not to be used for an extended period of time. * The indicator will light when the Power Switch is in any position other than OFF. N Neon and fluorescent lamps may induce noise. Keep the unit away from such lighting sources. N Handle the unit carefully - never apply excessive force to the controls and avoid dropping the unit. N Clean the exterior with a dry, soft cloth. Never use volatile liquids such as benzine or thinner. N After reading this owner's manual, keep it in a safe place for future reference. I USING THE HA-G1 1 With the Power Switch turned OFF, connect a pair of headphones to the PHONES jack (stereo mini jack). * The HA-G1's AUX IN jack (stereo mini jack) can be used to connect an external signal source to the HA-G1. Connecting a CD player, MD player, cassette player, etc., to the AUX IN jack with an audio cable allows you to play along with an external audio source. 2 The clip on the back of the HA-G1 is convenient for clipping the unit to your guitar strap or belt. 3 Connect the HA-G1's guitar cable to your guitar. 4 Slide the HA-G1's Power Switch to the CLEAN or DRIVE position. * Just as on a guitar amp, the CLEAN setting provides a distortion free tone, while the DRIVE setting provides a distorted tone. 5 Use the HA-G1's VOLUME control to adjust the level of the overall sound. * The volume of the CD player, etc. connected to the AUX IN jack should be adjusted using the volume control on the CD player, etc. Guitar 3 Headphone The indicator will light when the Power Switch is in any position other than OFF. 4 Distorted tone Clean tone Power OFF I SPECIFICATIONS N Switch : POWER OFF / CLEAN / DRIVE N Control : VOLUME N Input/Output terminals : PHONES (Stereo mini), AUX IN (Stereo mini) N Power supply : 9V dry cell battery (6F22 or 006P) N Dimensions (WxHxD) : 70 x 106 x 35 mm (2.8" x 4.2" x 1.4") N Weight : 147 g (5.2 oz) N Accessory : 9V dry cell battery (6F22) x 1 * Specifications and design subject to change without notice. I BATTERY REPLACEMENT When battery power is nearly exhausted, the overall volume decreases and the tone, when in the CLEAN mode, becomes distorted. When this condition occurs, replace the battery with a new one (6F22:006P-9V) as soon as possible. * Always turn the power OFF before replacing the battery. * Check the battery's polarity markings (+ and -) and attach accordingly. Battery Compartment Cover 1 2 5 6F22:006P-9V battery LINE OUT or PHONES jack CD CD Radio Cassette Cassette tape MD Player MD [Using the Clip] Guitar strap Belt Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. ͝ॅॴɹ˟ ˞ళ ൢ 9710 R1 Printed in Hong Kong อূॻ ɹ݄ɹ ҹ