Yamaha HTR-3064 Owners Manual - Page 10
Speaker layout, Connecting speakers, Changing speaker impedance - subwoofer
View all Yamaha HTR-3064 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Speaker layout 5.1-channel speaker layout (5 speakers + subwoofer) Front speaker R Front speaker L Subwoofer Connecting speakers CONNECTIONS Connecting speakers ■ Changing speaker impedance This unit is configured for 8Ω speakers when it is dispatched from the factory. When connecting to 6Ω speakers, carry out the following procedure to switch to 6Ω. 1 Set this unit to the standby mode. 2 Press A while pressing and holding STRAIGHT on the front panel. Release the keys when "ADVANCED SETUP" is displayed on the front panel display. After approximately 3 seconds, the top menu items are displayed. J1 A STRAIGHT Center speaker 60q 60q 80q 80q Surround speaker R Surround speaker L • Connect at least two speakers (front left and right). • If you cannot connect all five speakers, give priority to the surround speakers. • The surround speakers should be placed between 60 degrees and 80 degrees from the listening position. PHONES SILENT CINEMA INFO MEMORY PRESET FM AM INPUT BD DVD SCENE TV CD TONE CONTROL PROGRAM RADIO STRAIGHT 3 Check that "SP IMP." is displayed on the front panel. 4 Press STRAIGHT repeatedly to select a "6ΩMIN." 5 Switch this unit to the standby mode, and then switch it on again. The power turns on, when the settings you made has been configured. ■ CRT monitors We recommend that you use magnetically shielded speakers to avoid video distortion, especially for the front and center speakers near the screen. If your screen still gets interference from magnetically shielded speakers, move the speakers farther away from your TV. J 1 : See the section on "Extended functionality that can be configured as needed (Advanced Setup menu)" for details on the Advanced Setup menu (☞p. 55). En 10