Yamaha HTR-3066 HTR-3066 Easy Setup Guide - Page 6
Optimizing the speaker settings automatically (YPAO), SHTR-3066 only
View all Yamaha HTR-3066 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
HTR-3066 only 5 Optimizing the speaker settings automatically (YPAO) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. Also, refrain from using this function at night when it may be a nuisance to others. • During the measuring process, you cannot adjust the volume. • During the measuring process, keep the room as quiet as possible. • Do not connect headphones. • Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). • Move to the corner of the room or leave the room. Preparing for YPAO Turn on the subwoofer and set the volume to half. If the cross-over frequency is adjustable, set it to maximum. The unit (front) VOLUME CROSSOVER/ HIGH CUT TRANSMIT SLEEP RECEIVER HDMI 1 2 3 4 AV 1 2 3 4 AUDIO 5 1 2 USB V-AUX MODE FM INFO TUNER AM MEMORY PRESET TUNING MOVIE MUSIC SUR. DECODE STRAIGHT ENHANCER BD DVD SETUP SCENE TV CD RADIO OPTION SETUP ENTER RETURN VOLUME MUTE Cursor keys ENTER MIN MAX MIN MAX YPAO microphone Listening position Ear height Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to fix the microphone in place. 1 Connect the YPAO microphone to the YPAO MIC jack on the front panel. The following screen appears. Auto Setup Start Exit Press SETUP key to Start VOL. [SETUP]:Start SW L CR SL SR • To cancel the operation, disconnect the YPAO microphone, or use the cursor keys to select "Exit" and press ENTER, before starting the measurement. 2 To start the measurement, press SETUP. The measurement will start in 10 seconds. The following screen appears on the TV when the measurement finishes. Auto Setup Start Exit Measurement Finished Result 3 / 2 / 0.1 ch 3.0 / 10.5 m -3.0 / +10.0 dB OK:ENTER Finished VOL. SW L CR SL SR 6 En