Yamaha HTR-4063 Quick Reference Guide
Yamaha HTR-4063 Manual
 |
UPC - 027108935942
View all Yamaha HTR-4063 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha HTR-4063 manual content summary:
- Yamaha HTR-4063 | Quick Reference Guide - Page 1
English Quick Reference Guide ■ Accessories The following accessories are supplied with this product. PUSH Remote control Batteries (2) (AAA, R03, UM-4) AM loop antenna Indoor FM antenna VIDEO AUX input - Yamaha HTR-4063 | Quick Reference Guide - Page 2
Connect and install as follows the first time you use this unit. See the following explanations for the connections for each number. TV 3 2 Front speaker L 4 This unit Center speaker Front speaker R Subwoofer 1 Surround speaker R Surround 1 speaker L BD/DVD player (recorder) 1 Connect the - Yamaha HTR-4063 | Quick Reference Guide - Page 3
models only) When connecting 6 Ω speakers, set the speaker impedance to 6 Ω on this unit before making connections. Refer to Owner's Manual for information on settings. Center speaker Subwoofer Connecting the speakers 3 2 FRONT 1 4 1 Remove approximately 10 mm of insulation from the ends - Yamaha HTR-4063 | Quick Reference Guide - Page 4
TV sound control easier to use. For the connections and settings, refer to "Using the HDMI Control function" in Owner's Manual. When using a TV that supports HDMI Control functions When HDMI Control functions are enabled on the unit, input source can be switched automatically to match operations - Yamaha HTR-4063 | Quick Reference Guide - Page 5
using the above methods, such as devices that output video from component video output jacks and audio from analog output jacks. Refer to Owner's Manual for details. Set the VOLTAGE SELECTOR and connect the AC power cable 4 (Asia and General models) Connect the AC power cable (Other models) (Asia - Yamaha HTR-4063 | Quick Reference Guide - Page 6
, adjust the status, sizes, and volume balance of the speakers to provide an optimal sound field. This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker balance automatically with a simple procedure. When you use YPAO, a test tone will be - Yamaha HTR-4063 | Quick Reference Guide - Page 7
or a warning message appears either during or after measurement. Refer to "Set up the speaker parameters automatically (YPAO)" in Owner's Manual to solve the problem, and carry out YPAO again. 6 Press ENTER on the remote control to apply the results of measurement. YPAO VOL. Disconnect MIC - Yamaha HTR-4063 | Quick Reference Guide - Page 8
Operation guide ᶃ ᶄ ᶈ ᶅ ᶆ YPAO MIC INFO MEMORY PRESET FM tone control. - If you set an extreme tone balance, sounds may not match those from other channels. ©2010 Yamaha Corporation All rights reserved. - 8 - DIRECT VOLUME ᶃ SOURCE 1 1 5 TRANSMIT CODE SET SLEEP RECEIVER HDMI 2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
PUSH
Ex.
Ex.
- 1 -
English
Quick Reference Guide
Preparing the remote control
Accessories
■
Items necessary for connection
■
The following accessories are supplied with this product.
Speakers
External components
Remote control
Front speaker
Ex.
Ex.
Batteries (2) (AAA, R03,
UM-4)
Center speaker
AM loop antenna
Surround speaker
Indoor FM antenna
VIDEO AUX input cover
Active subwoofer
3
1
2
3
YPAO microphone
within 6 m
(20 ft)
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the
remote control sensor on this unit during operation.
TV
Cable
Cables for connecting external components
•
(may differ depending on the components you are connecting)
Speaker cables
•
(a quantity to match the number of speakers you are connecting)
Audio pin cable
•
(for subwoofer)
Playback device such as BD
(Blu-ray Disc)/DVD players
Use speakers with an impedance of at least 6 Ω.
•
If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
•
Prepare at least two speakers (for front). The priority of the other speakers is as follows:
•
1 Two surround speakers
2 One center speaker
Some features are not available in certain regions.