Yamaha HTR-5280 Owner's Manual - Page 62

SOUND FIELD PROGRAM No. Program (group) Sub-program 10 q/DTS Normal/ SURROUND Matrix 6.1/ES PRO LOGIC/Normal DOLBY DIGITAL/ Normal *1 DOLBY DIGITAL/ Matrix 6.1 *2 DTS DIGITAL SUR./ Normal *1 Input source Features Analog, PCM, Dolby Digital in 2-channel Dolby Digital The built-in decoder precisely reproduces sounds and sound effects from sources. The highly efficient decoding process improves crosstalk and channel separation, and makes sound positioning smoother and more precise. In this program, the digital sound field processor is not turned on. DTS DTS DIGITAL SUR./ ES *2 Enhanced PRO LOGIC/Enhanced DOLBY DIGITAL/ Enhanced *1 DOLBY DIGITAL/ Enhanced 6.1 *2 DTS DIGITAL SUR./ Enhanced *1 Analog, PCM, Dolby Digital in 2-channel Dolby Digital DTS This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital sound field processing create precise effects without altering the original sound orientation. The surround effects produced by this sound field wrap around the viewer naturally from the back to the left and right, and toward the screen. DTS DIGITAL SUR./ Enhanced ES *2 *1 The Dolby Digital Matrix 6.1 or DTS ES decoder is off. *2 The Dolby Digital Matrix 6.1 or DTS ES decoder is on. The " c " indicator lights up on the front panel display. y • If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically switched to the Dolby Digital playback sound field or DTS playback sound field. • If Dolby Digital Surround EX software or DTS ES software is played when "12 6.1/ES AUTO" on the SET MENU is set to ON, the Dolby Digital Matrix 6.1 or DTS ES decoder will automatically turn on and the corresponding DSP program will be selected. • 6.1/ES on the remote control can be used to turn the Dolby Digital Matrix 6.1 or DTS ES decoder on or off during Dolby Digital 5.1channel source or DTS 5.1-channel source playback. Notes • The " x " indicator does not light up when selecting the sub-program "Normal" of the q/DTS SURROUND program. • If "1A CENTER SP" on the SET MENU is set to NONE, no sound is output from the center speaker. • The effect sound is output from the main speakers when a monaural source is played with CINEMA DSP program groups 5 (Game) and 6 to 9. 58