Yamaha HTR-6080BL MCXSP10 Manual - Page 97
SCENE IR code setting, Bi-amplifier setting, Video parameter reset, Monitor check, CANCEL
View all Yamaha HTR-6080BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
See page 90 for the operation of the advanced setup. ■ SCENE IR code setting SCENE IR Use this feature to output the remote control signals at the REMOTE OUT jack automatically when this unit is in the SCENE mode. Choices: ON, OFF • Select "ON" when the component connected to the REMOTE OUT jack is the Yamaha component and has the capability of the SCENE control signals. This unit automatically sends the remote control signals to the component. • Select "OFF" when the component connected to the REMOTE OUT jack is not the Yamaha component and does not have the capability of the SCENE control signals. Note If noises are output when you operate the SCENE function, set "SCENE IR" to "OFF". ■ Bi-amplifier setting BI-AMP Use this feature to activate or deactivate the bi-amplifier function (see page 14). Choices: ON, OFF • Select "ON" if you want to activate the bi-amplifier function. "SUR.B L/R SP" is set to "NONE" automatically, and this unit outputs the front channel audio signals at the SURROUND BACK/BI-AMP speaker terminals. • Select "OFF" if you want to deactivate the bi-amplifier function. Note When "BI-AMP" is set to "ON", you can only select "FRONT B" or "NONE" in "EXTRA SP ASSIGN" (see page 72). Advanced setup ■ Video parameter reset V.RESET Use this feature to initialize the "VIDEO CONV.", "HDMI UP-SCALING", "HDMI ASP" and "OSD SHIFT" settings in "DISPLAY SET" (see page 81). Choices: YES, CANCEL ■ Monitor check MON.CHK Use this feature to activate or deactivate the monitor check function of this unit. When this parameter is set to "YES", this unit receives the information of the available video signal resolutions from the video monitor connected via HDMI (see page 81). Choices: YES, SKIP ADVANCED OPERATION English 93 En