Yamaha HTR 6140 Owner's Manual - Page 25
Setting the speaker impedance, Turning on and off the power, Turning on this unit - remote control
![]() |
UPC - 027108929958
View all Yamaha HTR 6140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
PREPARATION Connections Setting the speaker impedance Caution If you are to use 6 ohm speakers, set "SP IMP." to "6Ω MIN" as follows BEFORE using this unit. 1 Press ASTANDBY/ON on the front panel to set this unit to the standby mode. Refer to the right column for details. 2 Press and hold KTONE CONTROL and then press ASTANDBY/ON to turn on this unit. This unit turns on, and the advanced setup menu appears in the front panel display. While holding TONE CONTROL down STANDBY /ON Turning on and off the power ■ Turning on this unit Press ASTANDBY/ON (or HPOWER) to turn on this unit. y When you turn on this unit, there will be a 4 to 5-second delay before this unit can reproduce sound. ■ Set this unit to the standby mode Press ASTANDBY/ON (or ISTANDBY) to set this unit to the standby mode. In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. 3 Press LPROGRAM l / h to select "SP IMP.". "SP IMP." and the current speaker impedance setting ("8Ω MIN") appear in the front panel display. 4 Press MSTRAIGHT repeatedly to select "6Ω MIN". 5 Press ASTANDBY/ON to save the new setting and turn off this unit. Note The setting you made is reflected next time you turn on this unit. English 21 En
![](/manual_guide/products/yamaha-htr-6140-owners-manual-d18d5a6/25.png)