Yamaha IW280C Owners Manual - Page 4

INSTALLATION Before installation, check to ensure that the area you are installing the speaker is free of any ceiling joints, by tapping the ceiling or using a stud finder. If you wish to paint the speaker frame and grill, please refer to page 7 "PAINTING THE SPEAKER FRAME AND GRILL" before proceeding. 1 Position the cutout template where you are installing the speaker. Then trace around the template with a pencil. 4 Cut the ceiling along the outline you traced. TEMPLATE 2 Drill a pilot hole in the center outline you traced. 5 Run high quality speaker cable from your receiver to your speakers. Leave a few extra feet of cable. 3 Insert the bent coat hanger wire into the hole. Then slowly rotate to check for any obstruction. If there is any obstruction, patch the hole and select another location. 360o Note: You can insulate the cavity by placing a sheet of fiberglass insulation around the speaker components to improve speaker performance. 4 NS-IW280C