Yamaha KX-W482 Owner's Manual - Page 6

PLAYBACK (Common to DECKs A and B) Preparation for playback ÷ Turn on the POWER switch. ÷ Set your amplifier or receiver to cassette deck function mode. Basic operation - To play back a cassette tape KX-W582 4 POWER = ON PHONES 2 RESET s 7 !/⁄ DECK A DECK B KX-W482 5 1 6 3 STOP 1 4 POWER = ON PHONES 2 RESET 7 !/⁄ s DECK A DECK B 1 EJECT 4 DOLBY NR B OFF C + = Refer to the following description. 5 1 6 STOP 1 Insert the cassette with the exposed tape side facing down. (The side facing you is called the forward side and the opposite side is called the reverse side.) To close the compartment, push in the compartment door until it locks shut. 2 DECK A/B Press the DECK A/B button to select the deck to be operated. The corresponding indicator lights on the display. 3 KX-W582 only DSS DSS MODE Refer to the following description. 5 " MODE " RELAY + = 6 DIRECTION A B Refer to the following description. Select the tape running direction for DECK A or B. Each time this 7 PLAY button is pressed, the tape running direction changes between forward (#) and reverse (@), and the corresponding indicator lights on the display. To fast forward or rewind the tape When the tape running indicator # is lit: Pressing the ⁄ button fast forwards the tape while pressing the ! button rewinds the tape. When the tape running indicator @ is lit: Pressing the ! button fast forwards the tape while pressing the ⁄ button rewinds the tape. 6 To stop playback Press the STOP button. To remove the cassette tape, press the EJECT button. The cassette compartment door opens. To turn off the power, press the POWER button.