Yamaha M7CL M7cl Stagemix V1.5 User Guide - Page 15
Low-Mid Band
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Yamaha Commercial Audio M7CL StageMix User Guide V1.5 Note: the In/Out meters display the levels going In and Out of the EQ section. One band of Parametric EQ can be adjusted at a time. Press one of the green circles to select the band, and it will be highlighted yellow. EQ bands in StageMix are labelled as follows: HP = HPF (input channels only) 1 = Low Band 2 = Low-Mid Band 3 = High-Mid Band 4 = High Band The current values for Freq, Gain and Q will be displayed for the currently selected EQ band. Gain and Frequency can be adjusted by dragging the circle around the graph. Q is adjusted by using the iPad's "pinch" gesture: hold one finger (or thumb) on the screen while moving another finger closer to or further away from the first. TIP The most comfortable and accurate way of adjusting Q is to use a vertical pinch movement with the thumb and forefinger While an EQ band is being moved, the parameter value will turn yellow to indicate that it has changed. The little yellow arrows show which direction the band should be moved to return to its previous position. In some cases, it may be necessary to adjust the gain without altering the frequency. Or to adjust the frequency without changing the gain. In this case, the "Gain Lock" or "Frequency Lock" functions can be used. These buttons are located at the top of the EQ graph. The "Lock" buttons affect all 4 bands (but not the HPF). When a band is adjusted, the locked parameter value becomes red. Page 15