Yamaha MCR-332 Owners Manual - Page 8
CONNECTION, Connecting speakers/antennas/subwoofer
View all Yamaha MCR-332 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CONNECTION Connecting speakers/antennas/subwoofer Follow the procedure below to connect the speakers and FM/AM antennas to this unit. For information on your speakers, refer to the owner's manual supplied for the speakers. If a subwoofer is connected, low-frequency audio signals are output through SUBWOOFER OUT. CAUTION Do not connect the power cable of this unit until all cable connections are completed. AM antenna FM antenna Notes • Place the antenna in a location with good signal reception. • Digital devices located near the antenna may affect signal reception. Notes • The antenna should be stretched out. • If you use an outdoor antenna instead of the supplied FM antenna, reception will be better. • If radio reception is poor, change the height, direction, or placement of the antenna. • If you use an FM antenna that is not supplied with the unit, make sure that the base of the antenna is not threaded. Subwoofer (sold separately) Subwoofer cable (sold separately) Be sure to remove insulation from the end of each speaker cable. Notes • If you connect a subwoofer, use a subwoofer that has a built-in amplifier. • Be sure to connect the left channel (L), right channel (R), "+"(red) "-"(black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lacks bass. • Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/ or the speakers. • Use speakers having more than 6 Ω impedance. • There is a chance that placing speakers too close to a CRT-based (Braun tube) TV set might impair picture color. Should this happen, move the speakers away from the TV set. 4 En