Yamaha MR10 MR10 Owners Manual Image - Page 6

SI DE BATTERY COMPARTMENT The MR10 OUTPUT can be connected to: BATTERY REPLACEMENT • the INPUT of a guitar amplifier • the AUX IN terminal of a stereo amplifier trr • the LINE IN/AUX terminal of a portable radio/cassette deck • the INPUT of a mixer 0 OUTPUT AC Adaptor (PA-1) Delivers the output signal from the MR10 for connection to an amplifier or other signal processing equipment. The MR10 OUTPUT is not capable of directly driving Kick pedal (KP-10) a speaker. A speaker with a built-in amplifier such as the Producer Series MS10 monitor speaker can be used. Connection to the OUTPUT jack is made with a standard 1/4" phone plug. BD PEDAL (KP-10) An optional kick pedal (KP-10) can be connected to this jack permitting drum-like pedalwork with the MR10 bass drum sound. The manual bass drum finger pad is also operational when the KP-10 is used making it possible to produce complex bass drum patterns by combining patterns played on the pedal and finger pad. (1) EXTERNAL POWER JACK This connector accepts the plug from the optional PA-1 AC adaptor for 1. To remove the battery compartment cover, press down lightly and slide out as shown in the illustration. 2. Insert six R6 type batteries into the compartment, being careful to observe proper battery polarity. * To prevent damage due to battery leakage the batteries should be removed from the battery compartment if the unit will not be used for an extended period of time. * The power indicator LED indicates only whether power is on or off. The batteries should be replaced when a drop in overall volume or an increase in distortion is notices. Be sure to replace all 6 batteries at one time. 5 use when an AC wall outlet is available (not battery operation).