Yamaha MSP7Studio Owners Manual - Page 11

English Controls and Functions MSP7 STUDIO, MSP5 STUDIO MSP7 STUDIO
(Rear Panel) 1 2 3 4 (Front Panel) 5 6 7 8 MSP5 STUDIO
(Rear Panel) 1 2 (Front Panel) 3 4 6 7 8 1 POWER switch Turns power to the speaker on or off. When the power is turned on the POWER indicator (8) on the front panel will light green. 2 AC IN Connector Connect the supplied power cable here. First connect the power cord to the speaker, then insert the power cord plug into the AC outlet. 3 LOW TRIM switch Adjusts the level of low-frequency range. MSP7 STUDIO: With the "+1.5" setting, low frequencies around 45 Hz are boosted by 1.5 dB. With the "-1.5" and "-3" settings the same frequency range is cut by 1.5 dB or 3 dB, respectively. MSP5 STUDIO: With the "+1.5" setting, low frequencies around 60 Hz are boosted by 1.5 dB. With the "-1.5" and "-3" settings, the same frequency range is cut by 1.5 dB and 3 dB, respectively. 4 HIGH TRIM switch Adjusts the level of high-frequency range. With the "+1.5" setting, the range around 15 kHz is boosted by 1.5 dB. With the "-1.5" setting, the range around 15 kHz is cut by 1.5 dB. 5 LOW CUT switch (MSP7 STUDIO) Cuts the low-frequency range. With the "80 Hz" setting the range below 80 Hz is cut. With the "100 Hz" setting the range below 100 Hz is cut. 6 INPUT 1/2 connector These are balanced XLR-type and unbalanced phone-type input connectors. The MSP7 STUDIO only has an XLR-type input connector. Do NOT use both the XLR and Phone type connector at the same time. Please connect to only one of these connectors. 7 LEVEL control Adjusts the overall output level. 8 POWER indicator When the power is turned on the POWER indicator will light green. The power indicator will flash red to indicate clipping. MSP7 STUDIO/MSP5 STUDIO/SW10 STUDIO Owner's Manual 11