Yamaha MY16-C MY16-C Owners Manual - Page 10

ENGLISH 5 BUNDLE ASSIGNMENT [IN1] and [IN2] Rotary Switches These switches set the receive bundle number for audio signals to be received over the CobraNet network. The [IN1] switches specify the receive bundle 1 number, and the [IN2] switches specify the receive bundle 2 number. Two rotary switches are used to specify each number. See "Bundle Number Setting Procedure" on page 15 for details. 6 BUNDLE ASSIGNMENT [OUT1] and [OUT2] Rotary Switches These switches set the transmit bundle number for audio signals to be transmitted over the CobraNet network. The [OUT1] switches specify the transmit bundle 1 number, and the [OUT2] switches specify the transmit bundle 2 number. Two rotary switches are used to specify each number. See "Bundle Number Setting Procedure" on page 15 for details. ■ Circuit-board Switches RX TX 78 7 SERIAL ASSIGNMENT [RX] Rotary Switch Sets the receive channel for the CobraNet serial control signal from channel 1 through channel 15. The control signals are received from a device that has been set to the matching transmit-channel number. No serial control reception occurs if this switch is set to "0". 8 SERIAL ASSIGNMENT [TX] Rotary Switch Sets the transmit channel for the CobraNet serial control signal from channel 1 through channel 15. The control signals are sent to devices that have been set to the matching receive-channel number. No serial control transmission occurs if this switch is set to "0". When adjusting rotary switches please use a screwdriver with a blade that matches the switch groove. Attempting to use a screwdriver that is too large or too small can damage the switch. MY16-C Owner's Manual 9 7