Yamaha MY16-ES64 MY16-ES64 Owners Manual - Page 4

ENGLISH Introduction Introduction Thank you for purchasing the Yamaha MY16-ES64 EtherSound® interface card. MY16-ES64 is an EtherSound® card for use with compatible Yamaha professional audio equipment. Using the MY16-ES64 with a maximum of three MY16-EX Yamaha I/O expansion cards allows transmission and reception of up to 64 channels (in/out) of uncompressed digital audio signals when running at a sampling frequency of 48 kHz or 44.1 kHz. About the host devices in which the MY16-ES64 can be installed Before installing the card in a host device, please refer to the Yamaha Pro Audio web site for the latest information on the compatible host devices in which the card can be installed. Yamaha Pro Audio web site: http://www.yamahaproaudio.com/ EtherSound Firmware Update The EtherSound firmware can be updated from a computer connected to the EtherSound connector. Information about the latest versions and firmware downloads are available at the AuviTran website: http://www.auvitran.com/ Installation information Please refer to the owner's manual supplied with the host device for installation information. As well as securing the card in place, the fixing screws at the left and right of the card function as electrical grounds. Be sure to screw them in tightly. Accessories Owner's Manual Part Names and Functions ■ Panel 1 3 2 A EtherSound [IN][OUT] Connectors These are RJ-45 connectors that you can connect to other EtherSound devices or to a computer using an Ethernet cable. Use "AVS-ESMonitor," AuviTran's application software, to make settings for control and/or digital audio signal transmission and reception. NOTE: • Use RJ-45 connectors that are compatible with Neutrik's etherCON CAT5®. • Use an STP (Shielded Twisted Pair) cable to prevent electromagnetic interference. Also, firmly fasten the metal portion of the connector to the shield of the cable using conductive tape, etc. • For more details on EtherSound specifications and the length of available cables, refer to the following website. http://www.ethersound.com/ 4 MY16-ES64 Owner's Manual 4 About AVS-ESMonitor AVS-ESMonitor is application software made by the AuviTran SARL for the purpose of monitoring and controlling an EtherSound system. It allows you to make various EtherSound settings such as input/output routing. For details, refer to the following web site. http://www.auvitran.com/ B IN/OUT[TX][RX] Indicators Each corresponding indicator blinks when EtherSound [IN]/[OUT] connectors transmit or receive signals. When the [Identify] button for the MY16-ES64 is selected from the AVS-ESMonitor, all four of these indicators blink and will continue blinking until selected a second time.