Yamaha MY16 Dugan MY16 Owners Manual - Page 4
Precautions, PM5D/PM5D-RH, DSP5D, M7CL-48ES, MTX5-D, LS9-32
View all Yamaha MY16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Precautions Failure to observe the following warnings may lead to fatality or serious injury from fire or electric shock. 1. Before installing the card, you must refer to the owner's manual of the host device or to the Yamaha website ("Guidance on the use of Mini-YGDAI cards" page) to verify that your host device supports this card, and to verify the number of cards that can be installed in combination with other Yamaha or third-party cards.Yamaha website: http://www.yamahaproaudio.com/ 2. If one or more cards in a combination not endorsed by Yamaha are installed in a Yamaha device, electrical shock, fire, or malfunction may occur. Please note that the Dugan-MY16 can be used with the following models of Yamaha product that accept option I/O cards (Yamaha MY series and third-party products): PM5D/PM5D-RH, DSP5D, M7CL-48ES, M7CL-48, M7CL-32, MTX5-D, LS9-32, LS9-16, DM2000, DM1000, 02R96, 01V96, DME64N, DME24N, CL1, CL3, CL5. 3. To use the Dugan-MY16 card in a DM2000 or 02R96, the following system software is required: DM2000 Version 1.14 or later. 02R96 Version 1.06 or later. See the Yamaha Web site for upgrade information. 4. Do not attempt to disassemble or modify the card. Do not apply excessive force to board connectors or other board components. Mishandling the board may lead to shock, fire hazard, or equipment failure. 5. To eliminate shock hazard, disconnect the power cable from the main unit before installing this card. CAUTION: Failure to observe the following precautions may lead to personal injury, or may result in damage to equipment or other property. 6. Do not touch the board's metallic leads (pins) when handling the card. Pins are sharp and may cause hand cuts. 7. The card is electrostatic-sensitive. Before handling the card, you should briefly touch the main unit's metal casing with your bare hand to drain any static charge from your body. CAUTION: Dan Dugan Sound Design assumes no responsibility for data loss, equipment damage, or injury caused by inappropriate handling or usage.