Yamaha MY4-AEC MY4-AEC Owners Manual - Page 10
Euroblock Connection, Cable preparation
View all Yamaha MY4-AEC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Euroblock Connection Please be sure to use the supplied Euroblock plugs to connect the AES/EBU [IN] and [OUT] connectors. Cable preparation • To prepare the cable for attachment to a Euroblock approx. connector, strip the wire as shown in the illustration 7 mm using stranded wire to make connections. With a Euroblock connection, stranded wires may be prone to breakage because of metal fatigue due to the weight of the cable or due to vibration. Bundle the cables and the Euroblock tabs using the supplied cable ties (page 12). When rackmounting your equipment, use a lacing bar when possible to bundle and fasten the cables. NOTE Do not tin (plate with solder) the exposed end. • If cables will be frequently connected and disconnected, as in the case of a portable installation, we recommend that you use ferrules with insulation sleeves. Use a ferrule whose conductor portion has an external diameter of 1.6 mm or less, and a length of approximately 7 mm (such as the AI0,5-6WH made by the Phoenix Contact corporation). 1.6 mm or less approx. 7 mm 10 MY4-AEC Owner's Manual