Yamaha MY8-AEB MY8-AEB Owners Manual - Page 5

The MY8-AEB is an eight-channel digital input/output card that complies with the AES 3id-1995 standard. It provides video input jacks that allow the host device in which the MY8-AEB is installed to be synchronized to a video signal. Panel 1 2 REF VIDEO 7/8 5/6 3/4 1/2 7/8 5/6 3/4 1/2 INPUT OUTPUT I/O INTERFACE CARD MODEL MY8-AEB MADE IN JAPAN Switches 1 NTSC PAL 2 48 K 44.1 K 3 OFF ON DOWN UP 0.1% 4% IN7/8 REF V AE RSVD 4 5 Panel 1 REF VIDEO jack This is a video input jack used to generate a word clock synchronized to the video signal. It has the capability of maintaining the word clock even if the video signal is interrupted. In order to use this word clock, set switch 4 to the REF V position. 2 INPUT/OUTPUT jacks These are AES 3id-1995 compliant input and output jacks. Do not input signals other than in this format. Doing so may damage the device. Switches Set these switches as appropriate for your situation and for the device to which this unit is connected. 1 Video Signal Mode PAL NTSC Position PAL NTSC 2 Basic Fs Mode 44.1 kHz 48 kHz Position 44.1 K 48 K 3 Fs Factors Mode (Fs / Basic Fs) 25/24 (+4%) 1001/1000 (+0.1%) 1 (Basic Fs) 1000/1001 (-0.1%) 24/25 (-4%) OFF/ON ON OFF ON Position DOWN/UP UP DOWN 0.1% / 4% 4% 0.1% 0.1% 4% 4 Ch7/8 Word Clock Source Mode Synthesized from REF VIDEO INPUT 7/8 Position REF V IN7/8 This switch selects the word clock source that is provided as Ch 7/8 of the host device in which the MY8-AEB is installed. If this switch is set to the REF V position, you will be able to use the word clock that is generated from the video signal. Use switches 1-3 to specify the conditions for the word clock that is generated. NOTE: • If this is set to REF V, the word clock will continue to be provided from the MY8-AEB even if the video signal is interrupted or if a problem occurs with the input waveform. However, the word clock status indicator for channel 7/8 of the host device slot in which the MY8-AEB is installed will display an error such as SYNC ERROR to indicate that a problem has occurred. • If this is set to REF V and there is no signal being input to INPUT 7/8, the channel status indication (e.g., emphasis) for that channel of the host device may not be displayed correctly. 5 Reserved Leave this switch permanently set to the AE position for use. Host devices in which the MY8-AEB can be installed Model name DME32 DIO8 DM2000 02R96 DM1000 # of Usable cards 3 8 6 4 2 Model name 01V96 DME24N DME64N PM5D/PM5D-RH M7CL-48/32 # of Usable cards 1 1 4 4 3 NOTE: • For the latest information on host devices in which the MY8-AEB can be installed, refer to the Yamaha Pro Audio website. Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ 5