Yamaha NP-V80 Owner's Manual - Page 73

The Functions The "Functions" provide access to a range of detailed instrument parameters for tuning, setting the split point, and adjusting the voices and effects. Take a look at the function list starting on the opposite page. When you locate a function you want to set up, simply select the function's display name (shown to the right of the function name in the list) and adjust as required. Selecting and Setting Functions 1 Find the function you want to set in the list that begins on pages 74, 75. 2 Press the [FUNCTION] button. 4 Use the dial, the [+] and [-] buttons, or the [0]-[9] number buttons to set the selected function as required. In some cases the [+] button will initiate execution of the selected function, and the [-] will cancel the selection. StyleVol 100 3 Select a function. Press the CATEGORY [ ] and [ ] buttons as many times as necessary until the function's display name appears in the display. Direct numeric entry. The selected function. Transpos 00 • Decrement Press simultane- value by 1. ously to recall the • NO default setting. • Increment value by 1. • YES Some Function settings are stored in memory as soon as they are changed. See "The Backup Parameters" on page 50 for information on the function settings that are stored on the instrument. To restore all initial factor default settings perform the "Backup Clear" procedure described in the "Initialization" section on page 50. f r Reference Owner's Manual 73