Yamaha NS-10MMF Owner's Manual - Page 3
Connections To Your Amplifier, English - speakers
View all Yamaha NS-10MMF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English CONNECTIONS TO YOUR AMPLIFIER Before making connections, make sure that the amplifier is switched off. I CONNECTIONS • Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. • One side of the speaker cable is red and the other side is black. Connect the (+) terminals on the amplifier (or receiver) and speakers using the red side. Connect the (-) terminals on both components using the black side of the cable. • Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, -). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. When using a banana plug 1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Simply insert the banana plug into the terminal. Banana plug 3 2 1 How to Connect: 1 Loosen the knob. 2 Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. I Using the non-skid pads Put the provided non-skid pads at the four corners on the bottom of speaker to prevent the speaker from moving by vibrations etc. Non-skid pad 3 Insert the bare wire. 4 Tighten the knob and secure the cables. Test the firmness of the connection by pulling lightly on the cables at the terminal. Speaker (R) 4 1 Black Speaker (L) 3 Red R Red L + + Speaker output terminals of the amplifier (or receiver) Black - SPEAKERS - Black Amplifier or Receiver Note Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them. E-32