Yamaha NS-120 Owner's Manual - Page 5

English REMOVING THE FRONT COVER The front cover is fastened to the enclosure at six points, and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six pegs on the inside surface of the cover with the six corresponding holes on the speaker and push gently. Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. SPECIFICATION Type 2-way bass reflex speaker system (Magnetically-shielded type) Driver 13 cm cone woofer 3 cm dome tweeter Nominal Impedance 6 ohms Frequency Response 42 Hz - 35 kHz Nominal Input Power 60 W Maximum Input Power 200 W Sensitivity 88 dB/2.83 V/m Crossover Frequency 3 kHz Dimensions (W x H x D 168 x 800 x 269 mm Weight 12.5 kg Accessories Stand x 4 Screw (6 mm) x 4 Wood screw (4 mm) x 4 Pad x 4 Spike x 4 Nut x 4 q Specifications subject to change without notice due to product improvements. q Care should be taken not to exceed the input power values noted above. 5