Yamaha NS-525 Owner's Manual - Page 5

English PLACING THE SPEAKERS ■ Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. REMOVING THE FRONT COVER The front cover is fastened to the enclosure at six points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six holes on the inner surface of the cover with the six corresponding pegs on the speaker and push gently. ■ Using as front speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner's manual supplied with your amplifier. NS-525F Subwoofer Center Surround back Surround Note: This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away from the TV set. Note: When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. SPECIFICATIONS Type 3-way bass reflex speaker system Magnetic shielding type Driver 16 cm (6.5") cone woofer x 1 16 cm (6.5") mid-range x 1 3 cm (1") dome tweeter Impedance 6 Ω Frequency Response 35 Hz to 50 kHz (-10dB) Nominal Input Power 45 W Maximum Input Power 200 W Sensitivity 89 dB/2.83 V/m Crossover Frequency 500 Hz/3.8 kHz Dimensions (with stands)(WxHxD) 324 x 1010 x 380.1 mm (12-3/4" x 39-3/4" x 14-15/16") Weight 23 kg (50 lbs.11.3 oz.) • Specifications subject to change without notice due to product improvements. • Care should be taken not to exceed the input power values noted above. E-5